Welcome to minicom 2.5 OPTIONS: I18n Compiled on May 2 2011, 00:39:27. Port /dev/ttyUSB1 Press CTRL-A Z for help on special keys U-Boot SPL 2011.12 (Feb 16 2012 - 18:28:01) Texas Instruments OMAP4430 ES2.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.bin mkimage signature not found - ih_magic = ea000014 Assuming u-boot.bin .. reading u-boot.bin U-Boot 2011.12 (Feb 16 2012 - 18:28:01) CPU : OMAP4430 ES2.1 Board: OMAP4 Panda I2C: ready DRAM: 1 GiB WARNING: Caches not enabled MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: No ethernet found. checking for preEnv.txt reading preEnv.txt ** Unable to read "preEnv.txt" from mmc 0:1 ** Hit any key to stop autoboot: 0 reading uEnv.txt ** Unable to read "uEnv.txt" from mmc 0:1 ** reading boot.scr ** Unable to read "boot.scr" from mmc 0:1 ** reading uImage 4558328 bytes read Booting from mmc0 ... ## Booting kernel from Legacy Image at 82000000 ... Image Name: Ubuntu Kernel Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4558264 Bytes = 4.3 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-1407-omap4 (buildd@nasl) (gcc version 4.6.2 (Ubuntu/Linaro 4.6.2-16ubuntu1) ) #10-Ubuntu SMP PREEMPT Fri Mar 2 11:17:05 UTC 2012 (Ubuntu 3.2.0-1) [ 0.000000] CPU: ARMv7 Processor [411fc092] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: OMAP4 Panda board [ 0.000000] Reserving 16777216 bytes SDRAM for VRAM [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] OMAP4430 ES2.1 [ 0.000000] PERCPU: Embedded 8 pages/cpu @c1285000 s10080 r8192 d14496 u32768 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 255744 [ 0.000000] Kernel command line: console=ttyO2,115200n8 vram=16M root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] allocated 4194304 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 1007MB = 1007MB total [ 0.000000] Memory: 1007256k/1007256k available, 41320k reserved, 244736K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xf8000000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08f2538 (9130 kB) [ 0.000000] .init : 0xc08f3000 - 0xc0958760 ( 406 kB) [ 0.000000] .data : 0xc095a000 - 0xc09b3a88 ( 359 kB) [ 0.000000] .bss : 0xc09b3aac - 0xc0a7c454 ( 803 kB) [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:410 nr_irqs:410 410 [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at /build/buildd/linux-ti-omap4-3.2.0/arch/arm/common/gic.c:611 gic_init+0xb0/0x11c() [ 0.000000] Cannot allocate irq_descs @ IRQ16, assuming pre-allocated [ 0.000000] Modules linked in: [ 0.000000] [] (unwind_backtrace+0x0/0xec) from [] (dump_stack+0x20/0x24) [ 0.000000] [] (dump_stack+0x20/0x24) from [] (warn_slowpath_common+0x5c/0x74) [ 0.000000] [] (warn_slowpath_common+0x5c/0x74) from [] (warn_slowpath_fmt+0x40/0x48) [ 0.000000] [] (warn_slowpath_fmt+0x40/0x48) from [] (gic_init+0xb0/0x11c) [ 0.000000] [] (gic_init+0xb0/0x11c) from [] (gic_init_irq+0x6c/0x80) [ 0.000000] [] (gic_init_irq+0x6c/0x80) from [] (init_IRQ+0x1c/0x24) [ 0.000000] [] (init_IRQ+0x1c/0x24) from [] (start_kernel+0x184/0x318) [ 0.000000] [] (start_kernel+0x184/0x318) from [<80008044>] (0x80008044) [ 0.000000] ---[ end trace da227214a82491b7 ]--- [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000183] Calibrating delay loop... 1590.23 BogoMIPS (lpj=6213632) [ 0.070373] pid_max: default: 32768 minimum: 301 [ 0.070648] Security Framework initialized [ 0.070739] AppArmor: AppArmor initialized [ 0.070739] Yama: becoming mindful. [ 0.071105] Mount-cache hash table entries: 512 [ 0.072326] Initializing cgroup subsys cpuacct [ 0.072387] Initializing cgroup subsys memory [ 0.072448] Initializing cgroup subsys devices [ 0.072479] Initializing cgroup subsys freezer [ 0.072509] Initializing cgroup subsys net_cls [ 0.072509] Initializing cgroup subsys blkio [ 0.072570] Initializing cgroup subsys perf_event [ 0.072753] CPU: Testing write buffer coherency: ok [ 0.072814] ftrace: allocating 26900 entries in 80 pages [ 0.116149] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.116241] Calibrating local timer... 390.26MHz. [ 0.156524] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available [ 0.156616] Setting up static identity map for 0x80607208 - 0x80607250 [ 0.156646] L310 cache controller enabled [ 0.156677] l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x5e470000, Cache size: 1048576 B [ 0.233032] CPU1: Booted secondary processor [ 0.263214] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.263244] CPU1: Unknown IPI message 0x1 [ 0.263244] Brought up 2 CPUs [ 0.263275] SMP: Total of 2 processors activated (3144.71 BogoMIPS). [ 0.264221] devtmpfs: initialized [ 0.268524] omap_hwmod: l4_div_ck: missing clockdomain for l4_div_ck. [ 0.322601] omap_hwmod: mcpdm: _wait_target_ready: -16 [ 0.322601] ------------[ cut here ]------------ [ 0.322631] WARNING: at /build/buildd/linux-ti-omap4-3.2.0/arch/arm/mach-omap2/omap_hwmod.c:1509 _enable+0x1ec/0x220() [ 0.322662] Modules linked in: [ 0.322723] [] (unwind_backtrace+0x0/0xec) from [] (dump_stack+0x20/0x24) [ 0.322753] [] (dump_stack+0x20/0x24) from [] (warn_slowpath_common+0x5c/0x74) [ 0.322784] [] (warn_slowpath_common+0x5c/0x74) from [] (warn_slowpath_null+0x2c/0x34) [ 0.322814] [] (warn_slowpath_null+0x2c/0x34) from [] (_enable+0x1ec/0x220) [ 0.322845] [] (_enable+0x1ec/0x220) from [] (_setup.part.13+0x20/0xf0) [ 0.322845] [] (_setup.part.13+0x20/0xf0) from [] (_setup+0x94/0x9c) [ 0.322875] [] (_setup+0x94/0x9c) from [] (omap_hwmod_for_each+0x38/0x68) [ 0.322906] [] (omap_hwmod_for_each+0x38/0x68) from [] (omap_hwmod_setup_all+0x74/0xa0) [ 0.322937] [] (omap_hwmod_setup_all+0x74/0xa0) from [] (do_one_initcall+0xa0/0x170) [ 0.322967] [] (do_one_initcall+0xa0/0x170) from [] (kernel_init+0xc0/0x168) [ 0.322998] [] (kernel_init+0xc0/0x168) from [] (kernel_thread_exit+0x0/0x8) [ 0.322998] ---[ end trace da227214a82491b8 ]--- [ 0.323028] omap_hwmod: mcpdm: cannot be enabled (3) [ 0.327087] Enabling ERRATA 751472 [ 0.327117] OMAP4: Map 0xafe00000 to 0xfe600000 for dram barrier [ 0.327911] print_constraints: dummy: [ 0.328186] NET: Registered protocol family 16 [ 0.328826] GPMC revision 6.0 [ 0.328918] mpu.0: alias fck already exists [ 0.329193] iva.0: alias fck already exists [ 0.330444] OMAP GPIO hardware version 0.1 [ 0.332031] omap_mux_init: Add partition: #1: core, flags: 2 [ 0.333038] omap_mux_init: Add partition: #2: wkup, flags: 2 [ 0.335449] SRAM: Mapped pa 0x40300000 to va 0xf0840000 size: 0xd000 [ 0.338592] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.338592] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.343963] OMAP DMA hardware revision 0.0 [ 0.350891] bio: create slab at 0 [ 0.351654] print_constraints: vwl1271: 1800 mV [ 0.352783] i2c-core: driver [twl] using legacy suspend method [ 0.352783] i2c-core: driver [twl] using legacy resume method [ 0.353515] SCSI subsystem initialized [ 0.354675] usbcore: registered new interface driver usbfs [ 0.354766] usbcore: registered new interface driver hub [ 0.354919] usbcore: registered new device driver usb [ 0.369995] omap_i2c omap_i2c.1: bus 1 rev2.4.0 at 400 kHz [ 0.370605] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 0.371154] twl6030: PIH (irq 39) chaining IRQs 368..387 [ 0.371765] print_constraints: VUSB: 3300 mV normal standby [ 0.569122] twl6030_usb twl6030_usb: Initialized TWL6030 USB module [ 0.569610] print_constraints: VMMC: 1200 <--> 3000 mV at 3000 mV normal standby [ 0.570098] print_constraints: VPP: 1800 <--> 2500 mV at 1900 mV normal standby [ 0.570526] print_constraints: VUSIM: 1200 <--> 2900 mV at 1800 mV normal standby [ 0.571075] print_constraints: VCXIO: 1800 mV normal standby [ 0.571380] print_constraints: VDAC: 1800 mV normal standby [ 0.571838] print_constraints: VAUX1_6030: 1000 <--> 3000 mV at 1800 mV normal standby [ 0.571868] twl_reg twl_reg.37: Failed to set supply vmmc [ 0.571990] twl_reg twl_reg.37: can't register VAUX1_6030, -16 [ 0.571990] twl_reg: probe of twl_reg.37 failed with error -16 [ 0.572387] print_constraints: VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby [ 0.572875] print_constraints: VAUX3_6030: 1000 <--> 3000 mV at 1200 mV normal standby [ 0.573181] print_constraints: CLK32KG: [ 0.573486] print_constraints: VANA: 2100 mV normal standby [ 0.583404] omap_i2c omap_i2c.2: bus 2 rev2.4.0 at 400 kHz [ 0.598663] omap_i2c omap_i2c.3: bus 3 rev2.4.0 at 100 kHz [ 0.613891] omap_i2c omap_i2c.4: bus 4 rev2.4.0 at 400 kHz [ 0.614410] Advanced Linux Sound Architecture Driver Version 1.0.24. [ 0.614990] NetLabel: Initializing [ 0.614990] NetLabel: domain hash size = 128 [ 0.615020] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.615051] NetLabel: unlabeled traffic allowed by default [ 0.615447] Switching to clocksource 32k_counter [ 0.633941] FS-Cache: Loaded [ 0.634094] AppArmor: AppArmor Filesystem Enabled [ 0.647277] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host) [ 0.647918] musb-hdrc musb-hdrc: USB OTG mode controller at fc0ab000 using DMA, IRQ 124 [ 0.648162] NET: Registered protocol family 2 [ 0.648559] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.649780] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.651702] TCP bind hash table entries: 65536 (order: 7, 786432 bytes) [ 0.652801] TCP: Hash tables configured (established 131072 bind 65536) [ 0.652801] TCP reno registered [ 0.652832] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.652862] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.653259] NET: Registered protocol family 1 [ 0.653869] RPC: Registered named UNIX socket transport module. [ 0.653900] RPC: Registered udp transport module. [ 0.653900] RPC: Registered tcp transport module. [ 0.653930] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.718841] audit: initializing netlink socket (disabled) [ 0.718902] type=2000 audit(0.695:1): initialized [ 0.869720] highmem bounce pool size: 64 pages [ 0.878234] VFS: Disk quotas dquot_6.5.2 [ 0.878662] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.882293] FS-Cache: Netfs 'nfs' registered for caching [ 0.883148] fuse init (API version 7.17) [ 0.883666] msgmni has been set to 1489 [ 0.885284] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.885375] io scheduler noop registered [ 0.885406] io scheduler deadline registered [ 0.885467] io scheduler cfq registered (default) [ 0.886352] OMAP DSS rev 4.0 [ 0.919281] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0 [ 0.935852] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1 [ 0.967102] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2 [ 2.065643] console [ttyO2] enabled [ 2.154602] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3 [ 2.279998] [drm] Initialized drm 1.1.0 20060810 [ 2.285552] brd: module loaded [ 2.293518] loop: module loaded [ 2.296966] (stk) :sysfs entries created [ 2.301147] (stk) : debugfs entries created [ 2.310333] Fixed MDIO Bus: probed [ 2.314178] tun: Universal TUN/TAP device driver, 1.6 [ 2.319519] tun: (C) 1999-2004 Max Krasnyansky [ 2.326446] PPP generic driver version 2.4.2 [ 2.331329] usbcore: registered new interface driver smsc95xx [ 2.337677] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.344757] _regulator_get: ehci-omap.0 supply hsusb0 not found, using dummy regulator [ 2.353302] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller [ 2.359558] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1 [ 2.367553] ehci-omap ehci-omap.0: irq 109, io mem 0x4a064c00 [ 2.388946] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00 [ 2.395202] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.402435] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.410095] usb usb1: Product: OMAP-EHCI Host Controller [ 2.415710] usb usb1: Manufacturer: Linux 3.2.0-1407-omap4 ehci_hcd [ 2.422363] usb usb1: SerialNumber: ehci-omap.0 [ 2.427795] hub 1-0:1.0: USB hub found [ 2.431793] hub 1-0:1.0: 3 ports detected [ 2.467102] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.473815] ohci-omap3 ohci-omap3.0: OMAP3 OHCI Host Controller [ 2.480346] ohci-omap3 ohci-omap3.0: new USB bus registered, assigned bus number 2 [ 2.488494] ohci-omap3 ohci-omap3.0: irq 108, io mem 0x4a064800 [ 2.572814] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.580047] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.587707] usb usb2: Product: OMAP3 OHCI Host Controller [ 2.593444] usb usb2: Manufacturer: Linux 3.2.0-1407-omap4 ohci_hcd [ 2.600097] usb usb2: SerialNumber: ohci-omap3.0 [ 2.605590] hub 2-0:1.0: USB hub found [ 2.609588] hub 2-0:1.0: 3 ports detected [ 2.614379] Initializing USB Mass Storage driver... [ 2.619720] usbcore: registered new interface driver usb-storage [ 2.626098] USB Mass Storage support registered. [ 2.631378] mousedev: PS/2 mouse device common for all mice [ 2.637634] i2c-core: driver [tm12xx_ts] using legacy suspend method [ 2.644409] i2c-core: driver [tm12xx_ts] using legacy resume method [ 2.654510] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0 [ 2.661224] Linux media interface: v0.10 [ 2.665435] Linux video capture interface: v2.00 [ 2.673614] OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec [ 2.680572] device-mapper: uevent: version 1.0.3 [ 2.685882] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 2.696716] _regulator_get: omap_hsmmc.0 supply vmmc_aux not found, using dummy regulator [ 2.708312] _regulator_get: omap_hsmmc.4 supply vmmc_aux not found, using dummy regulator [ 2.763977] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.793701] thermal_governor_dev_register:Adding omap_ondie_governor governor [ 2.801300] thermal_init_thermal_state:Not all components registered for cpu domain sensor (null), gov=ee5168c0, cooling= (null) [ 2.814239] omap-iommu omap-iommu.0: ducati registered [ 2.822052] SDP4430 SoC init [ 2.856872] asoc: null-codec-dai <-> MultiMedia1 mapping ok [ 2.863800] asoc: null-codec-dai <-> MultiMedia2 mapping ok [ 2.871185] asoc: null-codec-dai <-> Voice mapping ok [ 2.877471] asoc: null-codec-dai <-> Tones mapping ok [ 2.883850] asoc: null-codec-dai <-> Vibra mapping ok [ 2.889770] asoc: null-codec-dai <-> MODEM mapping ok [ 2.895568] asoc: null-codec-dai <-> MultiMedia1 LP mapping ok [ 2.903167] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok [ 2.910217] asoc: twl6040-legacy <-> mcpdm-dl mapping ok [ 2.916778] asoc: dmic-hifi <-> omap-dmic-dai-0 mapping ok [ 2.923034] usb 1-1: New USB device found, idVendor=0424, idProduct=9514 [ 2.923858] asoc: twl6040-dl1 <-> mcpdm-dl1 mapping ok [ 2.924316] asoc: twl6040-ul <-> mcpdm-ul1 mapping ok [ 2.924713] asoc: twl6040-dl2 <-> mcpdm-dl2 mapping ok [ 2.925109] asoc: twl6040-vib <-> mcpdm-vib mapping ok [ 2.925537] asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok [ 2.925994] asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok [ 2.926452] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok [ 2.926910] asoc: MODEM <-> omap-mcbsp-dai.1 mapping ok [ 2.927307] asoc: dmic-hifi <-> omap-dmic-abe-dai-0 mapping ok [ 2.927703] asoc: dmic-hifi <-> omap-dmic-abe-dai-1 mapping ok [ 2.928161] asoc: dmic-hifi <-> omap-dmic-abe-dai-2 mapping ok [ 2.993591] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.002166] hub 1-1:1.0: USB hub found [ 3.006378] hub 1-1:1.0: 5 ports detected [ 3.012634] input: Panda Headset Jack as /devices/platform/soc-audio.0/sound/card0/input0 [ 3.025360] Error: Driver 'hdmi-audio-dai' is already registered, aborting... [ 3.032958] OMAP4 HDMI audio SoC init [ 3.037902] asoc: omap4-hdmi-audio-codec <-> hdmi-audio-dai mapping ok [ 3.045623] ALSA device list: [ 3.048797] #0: TI OMAP4 Board [ 3.052215] #1: TI OMAP4 HDMI Board [ 3.056182] u32 classifier [ 3.059051] Actions configured [ 3.064025] TCP cubic registered [ 3.068176] NET: Registered protocol family 10 [ 3.075988] NET: Registered protocol family 17 [ 3.080932] lib80211: common routines for IEEE802.11 drivers [ 3.087005] Registering the dns_resolver key type [ 3.092010] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1 [ 3.100219] ThumbEE CPU extension supported. [ 3.104797] Registering SWP/SWPB emulation handler [ 3.113952] thermal_cooling_dev_register:Found cpu cpu [ 3.119537] thermal_init_thermal_state:Not all components registered for cpu domain sensor (null), gov=ee5168c0, cooling=c0964a24 [ 3.132385] omap_sr_disable: omap_sr struct for sr_mpu not found [ 3.138854] omap_sr_disable: omap_sr struct for sr_mpu not found [ 3.145324] mmc0: host does not support reading read-only switch. assuming write-enable. [ 3.153991] Power Management for TI OMAP4. [ 3.158660] sr_init: No PMIC hook to init smartreflex [ 3.164093] mmc0: new high speed SDHC card at address b368 [ 3.170410] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 3.178894] mmcblk0: mmc0:b368 NCard 7.48 GiB [ 3.184295] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 3.192718] mmcblk0: p1 p2 [ 3.224273] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized [ 3.232696] SmartReflex Class3 initialized [ 3.256866] registered taskstats version 1 [ 3.272918] regulator_init_complete: VANA: incomplete constraints, leaving on [ 3.280914] regulator_init_complete: CLK32KG: incomplete constraints, leaving on [ 3.289947] regulator_init_complete: VDAC: incomplete constraints, leaving on [ 3.298950] regulator_init_complete: VUSB: incomplete constraints, leaving on [ 3.307342] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:50:55 UTC (946687855) [ 3.316680] omap4iss omap4iss: Revision 40000101 found [ 3.325225] ov5650 3-0036: Failed reading register 0x302a! [ 3.331024] ov5650 3-0036: Failure to detect OV5650 chip [ 3.336791] iss_register_subdev_group: Unable to register subdev ov5650 [ 3.344116] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 3.360900] mmc1: card claims to support voltages below the defined range. These will be ignored. [ 3.389923] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) [ 3.397155] mmc1: new SDIO card at address 0001 [ 3.483154] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00 [ 3.490417] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.501129] smsc95xx v1.0.4 [ 3.582916] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-ehci-omap.0-1.1, smsc95xx USB 2.0 Ethernet, 2e:40:19:c2:6c:0a [ 3.873352] omapdrm omapdrm.0: dvi has no driver.. skipping it [ 4.381164] No connectors reported connected with modes [ 4.386688] [drm] Cannot find any crtc or sizes - going 1024x768 [ 4.438323] Console: switching to colour frame buffer device 128x48 [ 4.456939] fb0: omapdrm frame buffer device [ 4.461486] drm: registered panic notifier [ 4.465820] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 4.472839] [drm] No driver support for vblank timestamp query. [ 4.479125] [drm] Initialized omapdrm 1.0.0 20110403 on minor 0 [ 4.487457] EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240) [ 6.107727] List of all partitions: [ 6.111450] b300 7846912 mmcblk0 driver: mmcblk [ 6.117095] b301 73712 mmcblk0p1 00000000-0000-0000-0000-000000000mmcblk0p1 [ 6.125610] b302 1874944 mmcblk0p2 00000000-0000-0000-0000-000000000mmcblk0p2 [ 6.134063] No filesystem could mount root, tried: ext3 [ 6.139739] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,2) [ 6.148742] [] (unwind_backtrace+0x0/0xec) from [] (dump_stack+0x20/0x24) [ 6.157806] [] (dump_stack+0x20/0x24) from [] (panic+0x6c/0x1a4) [ 6.166015] [] (panic+0x6c/0x1a4) from [] (mount_block_root+0x14c/0x1ac) [ 6.174957] [] (mount_block_root+0x14c/0x1ac) from [] (mount_root+0xf0/0x110) [ 6.184387] [] (mount_root+0xf0/0x110) from [] (prepare_namespace+0x168/0x1c8) [ 6.193878] [] (prepare_namespace+0x168/0x1c8) from [] (kernel_init+0x134/0x168) [ 6.203582] [] (kernel_init+0x134/0x168) from [] (kernel_thread_exit+0x0/0x8) [ 6.212982] CPU0: stopping [ 6.215850] [] (unwind_backtrace+0x0/0xec) from [] (dump_stack+0x20/0x24) [ 6.224884] [] (dump_stack+0x20/0x24) from [] (handle_IPI+0xfc/0x178) [ 6.233520] [] (handle_IPI+0xfc/0x178) from [] (do_IPI+0x18/0x1c) [ 6.241821] [] (do_IPI+0x18/0x1c) from [] (__irq_svc+0x34/0xac) [ 6.249908] Exception stack(0xc095bf40 to 0xc095bf88) [ 6.255249] bf40: f084d000 20000113 00000000 c09b4aec c095a000 c09b3b88 c060b63c c0961f9c [ 6.263916] bf60: 8000406a 411fc092 00000000 c095bf94 c095bf80 c095bf88 c00255d4 c0025140 [ 6.272552] bf80: 60000113 ffffffff [ 6.276245] [] (__irq_svc+0x34/0xac) from [] (omap_default_idle+0x28/0x2c) [ 6.285339] [] (omap_default_idle+0x28/0x2c) from [] (cpu_idle+0x8c/0xe0) [ 6.294372] [] (cpu_idle+0x8c/0xe0) from [] (rest_init+0x8c/0xa4) [ 6.302673] [] (rest_init+0x8c/0xa4) from [] (start_kernel+0x2b8/0x318) [ 6.311523] [] (start_kernel+0x2b8/0x318) from [<80008044>] (0x80008044) [ 6.319519] panic occurred, switching back to text console