Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.32-131.0.15.el6.x86_64 (mockbuild@x86-007.build.bos.redhat.com) (gcc version 4.4.4 20100726 (Red Hat 4.4.4-13) (GCC) ) #1 SMP Tue May 10 15:42:40 EDT 2011 Command line: ro root=UUID=d32b41a0-337f-4c8f-8034-bdf42d38a62f console=ttyS0 3 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fffd000 (usable) BIOS-e820: 000000003fffd000 - 0000000040000000 (reserved) BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) DMI 2.4 present. SMBIOS version 2.4 @ 0xFDA40 last_pfn = 0x3fffd max_arch_pfn = 0x400000000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 init_memory_mapping: 0000000000000000-000000003fffd000 RAMDISK: 371ae000 - 37fefecd ACPI: RSDP 00000000000fd8d0 00014 (v00 BOCHS ) ACPI: RSDT 000000003fffd740 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) ACPI: FACP 000000003fffff80 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) ACPI: DSDT 000000003fffd9b0 02589 (v01 BXPC BXDSDT 00000001 INTL 20100528) ACPI: FACS 000000003fffff40 00040 ACPI: SSDT 000000003fffd8b0 000FF (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) ACPI: APIC 000000003fffd7c0 0007A (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) ACPI: HPET 000000003fffd780 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) No NUMA configuration found Faking a node at 0000000000000000-000000003fffd000 Bootmem setup node 0 0000000000000000-000000003fffd000 NODE_DATA [0000000000009000 - 000000000003cfff] bootmap [000000000003d000 - 0000000000044fff] pages 8 (7 early reservations) ==> bootmem [0000000000 - 003fffd000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 0001f474e4] TEXT DATA BSS ==> [0001000000 - 0001f474e4] #3 [00371ae000 - 0037fefecd] RAMDISK ==> [00371ae000 - 0037fefecd] #4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000] #5 [0001f48000 - 0001f48051] BRK ==> [0001f48000 - 0001f48051] #6 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000] found SMP MP-table at [ffff8800000fda60] fda60 Zone PFN ranges: DMA 0x00000001 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000001 -> 0x0000009f 0: 0x00000100 -> 0x0003fffd ACPI: PM-Timer IO Port: 0xb008 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 40000000 (gap: 40000000:bffc0000) Booting paravirtualized kernel on bare hardware NR_CPUS:4096 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 30 pages/cpu @ffff880002000000 s92504 r8192 d22184 u1048576 pcpu-alloc: s92504 r8192 d22184 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 1 Built 1 zonelists in Node order, mobility grouping on. Total pages: 258359 Policy zone: DMA32 Kernel command line: ro root=UUID=d32b41a0-337f-4c8f-8034-bdf42d38a62f console=ttyS0 3 PID hash table entries: 4096 (order: 3, 32768 bytes) Checking aperture... No AGP bridge found AMD-Vi disabled by default: pass amd_iommu=on to enable Memory: 1002844k/1048564k available (5014k kernel code, 392k absent, 45328k reserved, 6906k data, 1232k init) Hierarchical RCU implementation. NR_IRQS:33024 nr_irqs:424 Console: colour VGA+ 80x25 console [ttyS0] enabled allocated 10485760 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups HPET: 3 timers in total, 0 timers will be used for per-cpu timer Fast TSC calibration using PIT Detected 2294.066 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 4588.13 BogoMIPS (lpj=2294066) pid_max: default: 32768 minimum: 301 Security Framework initialized SELinux: Initializing. Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio mce: CPU supports 10 MCE banks alternatives: switching to unfair spinlock ACPI: Core revision 20090903 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 20700 entries in 82 pages Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD QEMU Virtual CPU version 0.15.50 stepping 03 APIC calibration not consistent with PM-Timer: 199ms instead of 100ms APIC delta adjusted to PM-Timer: 6249992 (12499007) Performance Events: Broken PMU hardware detected, using software events only. NMI watchdog disabled (cpu0): hardware events not enabled Booting Node 0, Processors #1 Ok. Brought up 2 CPUs Total of 2 processors activated (23893.03 BogoMIPS). devtmpfs: initialized regulator: core version 0.5 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.3: quirk: region b000-b03f claimed by PIIX4 ACPI pci 0000:00:01.3: quirk: region b100-b10f claimed by PIIX4 SMB ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0 HEST: Table is not found! vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 100.000000 MHz counter Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 8 devices ACPI: ACPI bus type pnp unregistered NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 pci 0000:00:00.0: Limiting direct PCI/PCI transfers pci 0000:00:01.0: PIIX3: Enabling Passive Release pci 0000:00:01.0: Activating ISA DMA hang workarounds Trying to unpack rootfs image as initramfs... Freeing initrd memory: 14599k freed audit: initializing netlink socket (disabled) type=2000 audit(1316742797.887:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 1987 alg: No test for stdrng (krng) ksign: Installing public key data Loading keyring - Added public key C9F0DFBFCE81A817 - User ID: Red Hat, Inc. (Kernel Module GPG key) - Added public key D4A26C9CCD09BEDA - User ID: Red Hat Enterprise Linux Driver Update Program Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 acpiphp: Slot [1] registered acpiphp: Slot [2] registered acpiphp: Slot [3] registered acpiphp: Slot [4] registered acpiphp: Slot [5] registered acpiphp: Slot [6] registered acpiphp: Slot [7] registered acpiphp: Slot [8] registered acpiphp: Slot [9] registered acpiphp: Slot [10] registered acpiphp: Slot [11] registered acpiphp: Slot [12] registered acpiphp: Slot [13] registered acpiphp: Slot [14] registered acpiphp: Slot [15] registered acpiphp: Slot [16] registered acpiphp: Slot [17] registered acpiphp: Slot [18] registered acpiphp: Slot [19] registered acpiphp: Slot [20] registered acpiphp: Slot [21] registered acpiphp: Slot [22] registered acpiphp: Slot [23] registered acpiphp: Slot [24] registered acpiphp: Slot [25] registered acpiphp: Slot [26] registered acpiphp: Slot [27] registered acpiphp: Slot [28] registered acpiphp: Slot [29] registered acpiphp: Slot [30] registered acpiphp: Slot [31] registered pci-stub: invalid id string "" input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button [PWRF] processor LNXCPU:00: registered as cooling_device0 processor LNXCPU:01: registered as cooling_device1 ERST: Table is not found! Non-volatile memory driver v1.3 Linux agpgart interface v0.103 crash memory driver: version 1.1 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled ˙serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input1 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:01: RTC can wake from S4 rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one day, 114 bytes nvram, hpet irqs cpuidle: using governor ladder cpuidle: using governor menu input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 registered taskstats version 1 rtc_cmos 00:01: setting system clock to 2011-09-23 01:53:19 UTC (1316742799) Initalizing network drop monitor service Freeing unused kernel memory: 1232k freed Write protecting the kernel read-only data: 10240k Freeing unused kernel memory: 1112k freed Freeing unused kernel memory: 1796k freed input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3 dracut: dracut-004-53.el6 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.20.6-ioctl (2011-02-02) initialised: dm-devel@redhat.com udev: starting version 147 dracut: Starting plymouth daemon %G%Gscsi0 : ata_piix scsi1 : ata_piix ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc040 irq 14 ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc048 irq 15 ata2.00: ATAPI: QEMU DVD-ROM, 0.15.50, max UDMA/100 ata1.00: ATA-7: QEMU HARDDISK, 0.15.50, max UDMA/100 ata1.00: 16777216 sectors, multi 16: LBA48 ata2.00: configured for MWDMA2 ata1.00: configured for MWDMA2 scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 0.15 PQ: 0 ANSI: 5 scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 0.15 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 16777216 512-byte logical blocks: (8.58 GB/8.00 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk sr0: scsi3-mmc drive: 4x/4x xa/form2 tray Uniform CD-ROM driver Revision: 3.20 EXT4-fs (sda1): mounted filesystem with ordered data mode dracut: Mounted root filesystem /dev/sda1 dracut: Loading SELinux policy type=1404 audit(1316742812.650:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 type=1403 audit(1316742815.299:3): policy loaded auid=4294967295 ses=4294967295 dracut: dracut: Switching root readahead: starting hrtimer: interrupt took 5513351 ns Welcome to Red Hat Enterprise Linux Server Starting udev: udev: starting version 147 %Gpiix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0 e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k6-1-NAPI e1000: Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 e1000 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, high) -> IRQ 11 e1000 0000:00:03.0: eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56 e1000 0000:00:03.0: eth0: Intel(R) PRO/1000 Network Connection udev: renamed network interface eth0 to eth3 sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 platform microcode: firmware: requesting amd-ucode/microcode_amd.bin microcode: failed to load file amd-ucode/microcode_amd.bin microcode: CPU0: AMD CPU family 0x6 not supported microcode: CPU1: AMD CPU family 0x6 not supported Microcode Update Driver: v2.00 , Peter Oruba parport_pc 00:05: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] ppdev: user-space parallel port driver [ OK ] kvm: Nested Virtualization enabled tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky Setting hostname localhost.localdomain: [ OK ] Setting up Logical Volume Management: No volume groups found [ OK ] Checking filesystems Checking all file systems. [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/sda1 /dev/sda1: clean, 193153/448800 files, 1150911/1792000 blocks [ OK ] Remounting root filesystem in read-write mode: [ OK ] Mounting local filesystems: [ OK ] Enabling local filesystem quotas: [ OK ] Enabling /etc/fstab swaps: Adding 1219576k swap on /dev/sda2. Priority:-1 extents:1 across:1219576k [ OK ] Entering non-interactive startup Calling the system activity data collector (sadc): Starting cgconfig service: [ OK ] NET: Registered protocol family 10 lo: Disabled Privacy Extensions Bringing up loopback interface: [ OK ] Starting auditd: [ OK ] Starting portreserve: [ OK ] Starting system logger: [ OK ] Starting irqbalance: [ OK ] Starting rpcbind: [ OK ] Starting NFS statd: [ OK ] Starting RPC idmapd: RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. [ OK ] Starting system message bus: [ OK ] Setting network parameters... [ OK ] Starting NetworkManager daemon: [ OK ] Starting Avahi daemon... e1000: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX ADDRCONF(NETDEV_UP): eth3: link is not ready ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready [ OK ] Starting cups: [ OK ] Mounting other filesystems: [ OK ] Starting acpi daemon: [ OK ] Starting HAL daemon: [ OK ] Retrigger failed udev events[ OK ] Loading autofs4: [ OK ] Starting automount: [ OK ] Starting sshd: [ OK ] Starting postfix: [ OK ] Starting abrt daemon: [ OK ] Starting ksm: [ OK ] Starting ksmtuned: [ OK ] Starting crond: [ OK ] Starting atd: [ OK ] Starting rhsmcertd 240[ OK ] Red Hat Enterprise Linux Server release 6.1 (Santiago) Kernel 2.6.32-131.0.15.el6.x86_64 on an x86_64 localhost.localdomain login: Shutting down Avahi daemon: [ OK ] Stopping rhsmcertd[ OK ] Stopping atd: [ OK ] Stopping cups: [ OK ] Stopping ksmtuned: [ OK ] Stopping abrt daemon: [ OK ] Stopping sshd: [ OK ] Shutting down postfix: [ OK ] Stopping crond: [ OK ] Stopping automount: [ OK ] Stopping acpi daemon: [ OK ] Stopping HAL daemon: [ OK ] Stopping NetworkManager daemon: [ OK ] Stopping system message bus: [ OK ] Stopping rpcbind: [ OK ] Stopping auditd: type=1305 audit(1316743768.738:31): audit_pid=0 old=1029 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1 [ OK ] type=1400 audit(1316743771.288:32): avc: denied { sys_module } for pid=1946 comm="ip" capability=16 scontext=system_u:system_r:ifconfig_t:s0 tcontext=system_u:system_r:ifconfig_t:s0 tclass=capability type=1300 audit(1316743771.288:32): arch=c000003e syscall=16 success=no exit=-19 a0=4 a1=8933 a2=7fffb0d3a590 a3=7fffb0d3a360 items=0 ppid=1945 pid=1946 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="ip" exe="/sbin/ip" subj=system_u:system_r:ifconfig_t:s0 key=(null) Shutting down loopback interface: [ OK ] Stopping cgconfig service: [ OK ] Sending all processes the TERM signal... [ OK ] Sending all processes the KILL signal... [ OK ] Saving random seed: [ OK ] Syncing hardware clock to system time type=1111 audit(1316743783.516:33): user pid=2039 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:hwclock_t:s0 msg='changing system time: exe="/sbin/hwclock" hostname=? addr=? terminal=? res=success' [ OK ] Turning off swap: [ OK ] Turning off quotas: [ OK ] Unmounting pipe file systems: [ OK ] init: Re-executing /sbin/init Halting system... type=1128 audit(1316743786.585:34): user pid=1767 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:initrc_t:s0 msg='init: exe="/sbin/reboot" hostname=? addr=? terminal=console res=success' md: stopping all md devices. kvm: exiting hardware virtualization sd 0:0:0:0: [sda] Stopping disk e1000 0000:00:03.0: PCI INT A disabled ACPI: Preparing to enter system sleep state S5 Disabling non-boot CPUs ... SMP alternatives: switching to UP code Power down.