[ 0.000000] Linux version 2.6.20-15-generic (root@huffy) (gcc version 4.1.2 20061212 (prerelease) (Ubuntu 4.1.1-21ubuntu2)) #1 SMP Sat Apr 14 18:55:36 EDT 2007 (Ubuntu 2.6.20-15.26-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] sanitize start [ 0.000000] sanitize end [ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f000 end: 000000000009f000 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000000009f000 size: 0000000000001000 end: 00000000000a0000 type: 2 [ 0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2 [ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003fdf0000 end: 000000003fef0000 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000003fef0000 size: 0000000000003000 end: 000000003fef3000 type: 4 [ 0.000000] copy_e820_map() start: 000000003fef3000 size: 000000000000d000 end: 000000003ff00000 type: 3 [ 0.000000] copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000001400000 end: 0000000100000000 type: 2 [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fef0000 (usable) [ 0.000000] BIOS-e820: 000000003fef0000 - 000000003fef3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fef3000 - 000000003ff00000 (ACPI data) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] 126MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f5cc0 [ 0.000000] Entering add_active_range(0, 0, 261872) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 261872 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 261872 [ 0.000000] On node 0 totalpages: 261872 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 253 pages used for memmap [ 0.000000] HighMem zone: 32243 pages, LIFO batch:7 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP (v002 Nvidia ) @ 0x000f77b0 [ 0.000000] ACPI: XSDT (v001 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x3fef30c0 [ 0.000000] ACPI: FADT (v003 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x3fefa480 [ 0.000000] ACPI: HPET (v001 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000098) @ 0x3fefa6c0 [ 0.000000] ACPI: MCFG (v001 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x3fefa740 [ 0.000000] ACPI: MADT (v001 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x3fefa5c0 [ 0.000000] ACPI: SSDT (v001 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x3fefa7c0 [ 0.000000] ACPI: SSDT (v001 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x3fefad20 [ 0.000000] ACPI: DSDT (v001 NVIDIA ASUSACPI 0x00001000 MSFT 0x03000000) @ 0x00000000 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:6 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 15:6 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3ff00000:a0100000) [ 0.000000] Detected 3000.230 MHz processor. [ 19.560153] Built 1 zonelists. Total pages: 259827 [ 19.560157] Kernel command line: root=UUID=9476bd96-d28e-4ec9-9285-ef69ff8c67df ro quiet splash [ 19.560308] mapped APIC to ffffd000 (fee00000) [ 19.560311] mapped IOAPIC to ffffc000 (fec00000) [ 19.560314] Enabling fast FPU save and restore... done. [ 19.560317] Enabling unmasked SIMD FPU exception support... done. [ 19.560326] Initializing CPU#0 [ 19.560658] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 19.560689] spurious 8259A interrupt: IRQ7. [ 19.562037] Console: colour VGA+ 80x25 [ 19.562436] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 19.562832] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 19.582885] Memory: 1027692k/1047488k available (1992k kernel code, 19132k reserved, 893k data, 328k init, 129984k highmem) [ 19.582896] virtual kernel memory layout: [ 19.582897] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB) [ 19.582898] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 19.582899] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 19.582900] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 19.582901] .init : 0xc03d7000 - 0xc0429000 ( 328 kB) [ 19.582902] .data : 0xc02f2234 - 0xc03d16d4 ( 893 kB) [ 19.582903] .text : 0xc0100000 - 0xc02f2234 (1992 kB) [ 19.582907] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 19.583060] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31 [ 19.583066] hpet0: 3 32-bit timers, 25000000 Hz [ 19.584073] Using HPET for base-timer [ 19.662987] Calibrating delay using timer specific routine.. 6006.29 BogoMIPS (lpj=12012580) [ 19.663028] Security Framework v1.0.0 initialized [ 19.663033] SELinux: Disabled at boot. [ 19.663048] Mount-cache hash table entries: 512 [ 19.663175] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e49d 00000000 00000001 [ 19.663183] monitor/mwait feature present. [ 19.663185] using mwait in idle threads. [ 19.663192] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 19.663194] CPU: L2 cache: 2048K [ 19.663197] CPU: Physical Processor ID: 0 [ 19.663199] CPU: Processor Core ID: 0 [ 19.663201] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003180 0000e49d 00000000 00000001 [ 19.663210] Compat vDSO mapped to ffffe000. [ 19.663214] Remapping vsyscall page to ffffe000 [ 19.663228] Checking 'hlt' instruction... OK. [ 19.679078] SMP alternatives: switching to UP code [ 19.679427] Early unpacking initramfs... done [ 19.940560] ACPI: Core revision 20060707 [ 19.944135] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT. [ 19.950266] CPU0: Intel(R) Pentium(R) D CPU 3.00GHz stepping 05 [ 19.950288] SMP alternatives: switching to SMP code [ 19.950437] Booting processor 1/1 eip 3000 [ 19.961008] Initializing CPU#1 [ 20.038630] Calibrating delay using timer specific routine.. 6000.45 BogoMIPS (lpj=12000919) [ 20.038639] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e49d 00000000 00000001 [ 20.038645] monitor/mwait feature present. [ 20.038651] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 20.038653] CPU: L2 cache: 2048K [ 20.038655] CPU: Physical Processor ID: 0 [ 20.038656] CPU: Processor Core ID: 1 [ 20.038658] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003180 0000e49d 00000000 00000001 [ 20.039104] CPU1: Intel(R) Pentium(R) D CPU 3.00GHz stepping 05 [ 20.039138] Total of 2 processors activated (12006.74 BogoMIPS). [ 20.039379] ENABLING IO-APIC IRQs [ 20.039584] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 20.079279] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 20.079317] ...trying to set up timer (IRQ0) through the 8259A ... failed. [ 20.079320] ...trying to set up timer as Virtual Wire IRQ... failed. [ 20.119013] ...trying to set up timer as ExtINT IRQ... works. [ 20.362326] checking TSC synchronization across 2 CPUs: passed. [ 0.004006] Brought up 2 CPUs [ 0.234402] migration_cost=3195 [ 0.234703] Booting paravirtualized kernel on bare hardware [ 0.234783] Time: 23:35:59 Date: 03/14/107 [ 0.234817] NET: Registered protocol family 16 [ 0.234907] EISA bus registered [ 0.234912] ACPI: bus type pci registered [ 0.242070] PCI: PCI BIOS revision 3.00 entry at 0xf2060, last bus=6 [ 0.242072] PCI: Using configuration type 1 [ 0.242074] Setting up standard PCI resources [ 0.255173] ACPI: Interpreter enabled [ 0.255176] ACPI: Using IOAPIC for interrupt routing [ 0.255904] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.255911] PCI: Probing PCI hardware (bus 00) [ 0.257388] Boot video device is 0000:01:00.0 [ 0.258006] PCI: Transparent bridge - 0000:00:10.0 [ 0.258087] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.349663] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.356279] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.356684] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 *10 11 14 15) [ 0.357092] ACPI: PCI Interrupt Link [LNK3] (IRQs *5 7 9 10 11 14 15) [ 0.357495] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.357895] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 *11 14 15) [ 0.358296] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.358702] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.359107] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.359513] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15) [ 0.359922] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.360336] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.360739] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.361141] ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15) [ 0.361538] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.361943] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.362342] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15) [ 0.362743] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15) [ 0.363140] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.363538] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15) [ 0.363945] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15) [ 0.364444] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.364930] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 0.365424] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 0.365911] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 0.366401] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 0.366890] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. [ 0.367382] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. [ 0.367876] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 0.368366] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. [ 0.368857] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 0.369350] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. [ 0.369838] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. [ 0.370324] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 0.370812] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled. [ 0.371301] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. [ 0.371799] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. [ 0.372290] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. [ 0.372782] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 0.373277] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.373760] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. [ 0.374242] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. [ 0.374659] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.374669] pnp: PnP ACPI init [ 0.381967] pnp: PnP ACPI: found 15 devices [ 0.381972] PnPBIOS: Disabled by ACPI PNP [ 0.382022] PCI: Using ACPI for IRQ routing [ 0.382026] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 0.585702] NET: Registered protocol family 8 [ 0.585704] NET: Registered protocol family 20 [ 0.586170] pnp: 00:01: ioport range 0x4000-0x407f could not be reserved [ 0.586173] pnp: 00:01: ioport range 0x4080-0x40ff has been reserved [ 0.586176] pnp: 00:01: ioport range 0x4400-0x447f has been reserved [ 0.586179] pnp: 00:01: ioport range 0x4480-0x44ff could not be reserved [ 0.586182] pnp: 00:01: ioport range 0x4800-0x487f has been reserved [ 0.586184] pnp: 00:01: ioport range 0x4880-0x48ff has been reserved [ 0.586660] PCI: Bridge: 0000:00:02.0 [ 0.586664] IO window: a000-afff [ 0.586670] MEM window: c6000000-c8ffffff [ 0.586675] PREFETCH window: b0000000-bfffffff [ 0.586680] PCI: Bridge: 0000:00:04.0 [ 0.586682] IO window: disabled. [ 0.586686] MEM window: disabled. [ 0.586690] PREFETCH window: disabled. [ 0.586694] PCI: Bridge: 0000:00:05.0 [ 0.586696] IO window: disabled. [ 0.586700] MEM window: disabled. [ 0.586704] PREFETCH window: disabled. [ 0.586708] PCI: Bridge: 0000:00:06.0 [ 0.586710] IO window: disabled. [ 0.586714] MEM window: disabled. [ 0.586717] PREFETCH window: disabled. [ 0.586722] PCI: Bridge: 0000:00:07.0 [ 0.586723] IO window: disabled. [ 0.586727] MEM window: disabled. [ 0.586731] PREFETCH window: disabled. [ 0.586738] PCI: Bridge: 0000:00:10.0 [ 0.586741] IO window: b000-bfff [ 0.586747] MEM window: c4000000-c5ffffff [ 0.586756] PREFETCH window: c0000000-c3ffffff [ 0.586772] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 0.586782] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 0.586792] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 0.586802] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 0.586812] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 0.586824] PCI: Setting latency timer of device 0000:00:10.0 to 64 [ 0.586857] NET: Registered protocol family 2 [ 0.629229] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.629397] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.629970] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.630258] TCP: Hash tables configured (established 131072 bind 65536) [ 0.630261] TCP reno registered [ 0.641310] checking if image is initramfs... it is [ 1.155800] Freeing initrd memory: 6418k freed [ 1.156530] audit: initializing netlink socket (disabled) [ 1.156545] audit(1176593759.860:1): initialized [ 1.156715] highmem bounce pool size: 64 pages [ 1.156880] VFS: Disk quotas dquot_6.5.1 [ 1.156912] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.156982] io scheduler noop registered [ 1.156985] io scheduler anticipatory registered [ 1.156988] io scheduler deadline registered [ 1.157024] io scheduler cfq registered (default) [ 1.179515] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 1.179550] assign_interrupt_mode Found MSI capability [ 1.179553] Allocate Port Service[0000:00:02.0:pcie00] [ 1.179645] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 1.179680] assign_interrupt_mode Found MSI capability [ 1.179682] Allocate Port Service[0000:00:04.0:pcie00] [ 1.179773] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 1.179808] assign_interrupt_mode Found MSI capability [ 1.179811] Allocate Port Service[0000:00:05.0:pcie00] [ 1.179899] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 1.179933] assign_interrupt_mode Found MSI capability [ 1.179936] Allocate Port Service[0000:00:06.0:pcie00] [ 1.180025] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 1.180060] assign_interrupt_mode Found MSI capability [ 1.180063] Allocate Port Service[0000:00:07.0:pcie00] [ 1.180211] isapnp: Scanning for PnP cards... [ 1.531553] isapnp: No Plug & Play device found [ 1.557636] Real Time Clock Driver v1.12ac [ 1.557834] hpet_resources: 0xfeff0000 is busy [ 1.557868] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 1.558011] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.558697] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.558968] mice: PS/2 mouse device common for all mice [ 1.559565] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 1.559797] input: Macintosh mouse button emulation as /class/input/input0 [ 1.559836] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 1.559840] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 1.560055] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.563570] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.563575] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.563700] EISA: Probing bus 0 at eisa.0 [ 1.563718] Cannot allocate resource for EISA slot 4 [ 1.563721] Cannot allocate resource for EISA slot 5 [ 1.563733] EISA: Detected 0 cards. [ 1.593805] TCP cubic registered [ 1.593824] NET: Registered protocol family 1 [ 1.593855] Starting balanced_irq [ 1.593862] Using IPI No-Shortcut mode [ 1.593938] input: AT Translated Set 2 keyboard as /class/input/input1 [ 1.593989] ACPI: (supports S0 S1 S3 S4 S5) [ 1.594053] Magic number: 3:509:605 [ 1.594104] hash matches device ptyd9 [ 1.594115] hash matches device ptyac [ 1.594379] Freeing unused kernel memory: 328k freed [ 1.594490] Time: tsc clocksource has been installed. [ 2.843350] ACPI: Fan [FAN] (on) [ 2.847827] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [Nvidia] OemTableId [ASUSACPI] [20060707] [ 2.848222] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [Nvidia] OemTableId [ASUSACPI] [20060707] [ 2.848294] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707] [ 2.848302] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707] [ 2.849936] ACPI: Thermal Zone [THRM] (40 C) [ 3.320780] NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0 [ 3.320810] NFORCE-MCP51: chipset revision 161 [ 3.320813] NFORCE-MCP51: not 100% native mode: will probe irqs later [ 3.320821] NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller [ 3.320832] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA [ 3.320845] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA [ 3.320861] Probing IDE interface ide0... [ 3.333910] usbcore: registered new interface driver usbfs [ 3.333931] usbcore: registered new interface driver hub [ 3.333956] usbcore: registered new device driver usb [ 3.334634] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.339844] SCSI subsystem initialized [ 3.345014] libata version 2.20 loaded. [ 3.383418] Floppy drive(s): fd0 is 1.44M [ 3.419281] FDC 0 is a post-1991 82077 [ 3.628052] hda: WDC WD400BB-00DGA0, ATA DISK drive [ 3.907867] hdb: WDC WD1200AB-00CBA1, ATA DISK drive [ 3.967089] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 3.990157] Probing IDE interface ide1... [ 4.727301] hdc: SONY CD-RW CRX220E1, ATAPI CD/DVD-ROM drive [ 5.510726] hdd: HP DVD Writer 420, ATAPI CD/DVD-ROM drive [ 5.570149] ide1 at 0x170-0x177,0x376 on irq 15 [ 5.575870] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 [ 5.575878] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 16 [ 5.575890] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 5.575894] ohci_hcd 0000:00:0b.0: OHCI Host Controller [ 5.576036] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1 [ 5.576052] ohci_hcd 0000:00:0b.0: irq 16, io mem 0xc9005000 [ 5.636658] usb usb1: configuration #1 chosen from 1 choice [ 5.636690] hub 1-0:1.0: USB hub found [ 5.636700] hub 1-0:1.0: 8 ports detected [ 5.744868] sata_nv 0000:00:0e.0: version 3.3 [ 5.745394] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22 [ 5.745401] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 22 (level, low) -> IRQ 17 [ 5.745422] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 5.745487] ata1: SATA max UDMA/133 cmd 0x000109f0 ctl 0x00010bf2 bmdma 0x0001d400 irq 17 [ 5.745515] ata2: SATA max UDMA/133 cmd 0x00010970 ctl 0x00010b72 bmdma 0x0001d408 irq 17 [ 5.745527] scsi0 : sata_nv [ 6.054308] usb 1-3: new full speed USB device using ohci_hcd and address 2 [ 6.054329] ata1: SATA link down (SStatus 0 SControl 300) [ 6.064479] ATA: abnormal status 0x7F on port 0x000109f7 [ 6.064513] scsi1 : sata_nv [ 6.374090] ata2: SATA link down (SStatus 0 SControl 300) [ 6.384240] ATA: abnormal status 0x7F on port 0x00010977 [ 6.385536] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 21 [ 6.385542] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 21 (level, low) -> IRQ 18 [ 6.385560] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 6.385591] ata3: SATA max UDMA/133 cmd 0x000109e0 ctl 0x00010be2 bmdma 0x0001e800 irq 18 [ 6.385618] ata4: SATA max UDMA/133 cmd 0x00010960 ctl 0x00010b62 bmdma 0x0001e808 irq 18 [ 6.385631] scsi2 : sata_nv [ 6.532802] usb 1-3: configuration #1 chosen from 1 choice [ 6.693932] ata3: SATA link down (SStatus 0 SControl 300) [ 6.704083] ATA: abnormal status 0x7F on port 0x000109e7 [ 6.704120] scsi3 : sata_nv [ 6.825816] usb 1-4: new full speed USB device using ohci_hcd and address 3 [ 7.013696] ata4: SATA link down (SStatus 0 SControl 300) [ 7.023847] ATA: abnormal status 0x7F on port 0x00010967 [ 7.025256] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 [ 7.025264] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 19 [ 7.025275] PCI: Setting latency timer of device 0000:00:0b.1 to 64 [ 7.025279] ehci_hcd 0000:00:0b.1: EHCI Host Controller [ 7.025311] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2 [ 7.025341] ehci_hcd 0000:00:0b.1: debug port 1 [ 7.025346] PCI: cache line size of 128 is not supported by device 0000:00:0b.1 [ 7.025364] ehci_hcd 0000:00:0b.1: irq 19, io mem 0xc9006000 [ 7.025373] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 7.025451] usb usb2: configuration #1 chosen from 1 choice [ 7.025478] hub 2-0:1.0: USB hub found [ 7.025486] hub 2-0:1.0: 8 ports detected [ 7.027258] usb 1-4: device descriptor read/all, error -62 [ 7.030791] hda: max request size: 128KiB [ 7.033615] hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) [ 7.033622] hda: cache flushes not supported [ 7.033660] hda:hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } [ 7.046206] hda: dma_intr: error=0x84 { DriveStatusError BadCRC } [ 7.046212] ide: failed opcode was: unknown [ 7.046543] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } [ 7.046549] hda: dma_intr: error=0x84 { DriveStatusError BadCRC } [ 7.046554] ide: failed opcode was: unknown [ 7.050278] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } [ 7.050285] hda: dma_intr: error=0x84 { DriveStatusError BadCRC } [ 7.050289] ide: failed opcode was: unknown [ 7.050552] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } [ 7.050558] hda: dma_intr: error=0x84 { DriveStatusError BadCRC } [ 7.050562] ide: failed opcode was: unknown [ 7.051535] hdb: DMA disabled [ 7.085747] usb 1-3: USB disconnect, address 2 [ 7.097696] ide0: reset: success [ 7.104541] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } [ 7.104548] hda: dma_intr: error=0x84 { DriveStatusError BadCRC } [ 7.104553] ide: failed opcode was: unknown [ 7.104877] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } [ 7.104883] hda: dma_intr: error=0x84 { DriveStatusError BadCRC } [ 7.104888] ide: failed opcode was: unknown [ 7.108652] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } [ 7.108658] hda: dma_intr: error=0x84 { DriveStatusError BadCRC } [ 7.108663] ide: failed opcode was: unknown [ 7.108915] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } [ 7.108921] hda: dma_intr: error=0x84 { DriveStatusError BadCRC } [ 7.108925] ide: failed opcode was: unknown [ 7.130443] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 7.130450] ACPI: PCI Interrupt 0000:06:0c.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 20 [ 7.130488] skge 1.9 addr 0xc5000000 irq 20 chip Yukon-Lite rev 9 [ 7.130601] skge eth0: addr 00:18:f3:f0:a3:ba [ 7.157678] ide0: reset: success [ 7.162706] hda1 hda2 < hda5 hda6 > hda3 [ 7.188434] hdb: max request size: 128KiB [ 7.199730] hdb: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=65535/16/63 [ 7.199737] hdb: cache flushes not supported [ 7.199768] hdb: hdb1 [ 7.216871] hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) [ 7.216880] Uniform CD-ROM driver Revision: 3.20 [ 7.256413] hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) [ 7.676953] Attempting manual resume [ 7.676957] swsusp: Resume From Partition 3:6 [ 7.676959] PM: Checking swsusp image. [ 7.677125] PM: Resume from disk failed. [ 7.713607] kjournald starting. Commit interval 5 seconds [ 7.713626] EXT3-fs: mounted filesystem with ordered data mode. [ 7.774613] usb 2-4: new high speed USB device using ehci_hcd and address 3 [ 7.910883] usb 2-4: configuration #1 chosen from 1 choice [ 8.214513] usb 1-3: new full speed USB device using ohci_hcd and address 5 [ 8.706754] usb 1-3: configuration #1 chosen from 1 choice [ 18.180672] skge eth0: enabling interface [ 19.429416] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 19.432339] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 19.564853] Linux video capture interface: v2.00 [ 19.666114] NET: Registered protocol family 17 [ 19.703860] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000 [ 19.703900] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5100 [ 19.751345] ivtv: ==================== START INIT IVTV ==================== [ 19.751349] ivtv: version 0.10.1 (tagged release) loading [ 19.751351] ivtv: Linux version: 2.6.20-15-generic SMP mod_unload 586 [ 19.751353] ivtv: In case of problems please include the debug info between [ 19.751355] ivtv: the START INIT IVTV and END INIT IVTV lines, along with [ 19.751357] ivtv: any module options, when mailing the ivtv-users mailinglist. [ 19.751445] ivtv0: Autodetected Hauppauge card (cx23416 based) [ 19.752274] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [ 19.752284] ACPI: PCI Interrupt 0000:06:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 21 [ 19.752296] ivtv0: Unreasonably low latency timer, setting to 64 (was 32) [ 19.867722] input: PC Speaker as /class/input/input2 [ 19.903510] input: PS2++ Logitech Wheel Mouse as /class/input/input3 [ 19.940943] parport: PnPBIOS parport detected. [ 19.941006] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 20.007312] usbcore: registered new interface driver libusual [ 20.049195] skge eth0: Link is up at 100 Mbps, full duplex, flow control none [ 20.131417] Initializing USB Mass Storage driver... [ 20.131488] scsi4 : SCSI emulation for USB Mass Storage devices [ 20.135307] usb-storage: device found at 3 [ 20.135310] usb-storage: waiting for device to settle before scanning [ 20.268773] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x000D [ 20.268797] usbcore: registered new interface driver usb-storage [ 20.268800] USB Mass Storage support registered. [ 20.268808] usbcore: registered new interface driver usblp [ 20.268811] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver [ 20.416526] ivtv0: unable to open firmware v4l-cx2341x-enc.fw (must be 376836 bytes) [ 20.416530] ivtv0: did you put the firmware in the hotplug firmware directory? [ 20.416533] ivtv0 warning: failed loading encoder firmware [ 20.416535] ivtv0 warning: Error -3 loading firmware [ 20.416537] ivtv0: Retry loading firmware [ 21.031239] ivtv0: unable to open firmware v4l-cx2341x-enc.fw (must be 376836 bytes) [ 21.031247] ivtv0: did you put the firmware in the hotplug firmware directory? [ 21.031250] ivtv0 warning: failed loading encoder firmware [ 21.031252] ivtv0 warning: Error -3 loading firmware [ 21.031254] ivtv0: Error initializing firmware [ 21.031432] ivtv0: Error -19 on initialization [ 21.031480] ivtv: ==================== END INIT IVTV ==================== [ 21.037988] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23 [ 21.037992] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI 23 (level, low) -> IRQ 16 [ 21.038009] PCI: Setting latency timer of device 0000:00:10.1 to 64 [ 21.546827] fuse init (API version 7.8) [ 21.593752] lp0: using parport0 (interrupt-driven). [ 21.724626] Adding 746980k swap on /dev/disk/by-uuid/b805847a-4f74-4f5c-b68e-32c56e2dfeaa. Priority:-1 extents:1 across:746980k [ 21.724938] Adding 843340k swap on /dev/disk/by-uuid/14485df3-5f36-4b14-ac7c-918a9f76ed0c. Priority:-2 extents:1 across:843340k [ 21.852623] EXT3 FS on hda3, internal journal [ 22.090314] kjournald starting. Commit interval 5 seconds [ 22.090490] EXT3 FS on hda1, internal journal [ 22.090496] EXT3-fs: mounted filesystem with ordered data mode. [ 23.596953] skge eth0: disabling interface [ 23.599283] skge eth0: enabling interface [ 23.807054] NET: Registered protocol family 10 [ 23.807167] lo: Disabled Privacy Extensions [ 25.130458] usb-storage: device scan complete [ 25.131722] scsi 4:0:0:0: Direct-Access Memorex TD Classic 003C 5.00 PQ: 0 ANSI: 0 CCS [ 25.177405] SCSI device sda: 2015232 512-byte hdwr sectors (1032 MB) [ 25.179274] sda: Write Protect is off [ 25.179278] sda: Mode Sense: 23 00 00 00 [ 25.179280] sda: assuming drive cache: write through [ 25.184644] SCSI device sda: 2015232 512-byte hdwr sectors (1032 MB) [ 25.186266] sda: Write Protect is off [ 25.186270] sda: Mode Sense: 23 00 00 00 [ 25.186272] sda: assuming drive cache: write through [ 25.186319] sda: sda1 [ 25.188469] sd 4:0:0:0: Attached scsi removable disk sda [ 25.199647] sd 4:0:0:0: Attached scsi generic sg0 type 0 [ 25.284385] skge eth0: Link is up at 100 Mbps, full duplex, flow control none [ 27.803123] Using specific hotkey driver [ 27.894240] input: Power Button (FF) as /class/input/input4 [ 27.894406] ACPI: Power Button (FF) [PWRF] [ 27.895262] input: Power Button (CM) as /class/input/input5 [ 27.895401] ACPI: Power Button (CM) [PWRB] [ 27.906130] ibm_acpi: ec object not found [ 27.973466] No dock devices found. [ 28.095696] pcc_acpi: loading... [ 32.373508] Capability LSM initialized [ 33.144873] ppdev: user-space parallel port driver [ 33.837993] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [ 33.838000] apm: disabled - APM is not SMP safe. [ 34.047945] Bluetooth: Core ver 2.11 [ 34.048014] NET: Registered protocol family 31 [ 34.048017] Bluetooth: HCI device and connection manager initialized [ 34.048021] Bluetooth: HCI socket layer initialized [ 34.066814] Bluetooth: L2CAP ver 2.8 [ 34.066818] Bluetooth: L2CAP socket layer initialized [ 34.085113] Bluetooth: RFCOMM socket layer initialized [ 34.085139] Bluetooth: RFCOMM TTY layer initialized [ 34.085142] Bluetooth: RFCOMM ver 1.8 [ 48.212043] eth0: no IPv6 routers present [ 54.784341] kjournald starting. Commit interval 5 seconds [ 54.797760] EXT3 FS on sda1, internal journal [ 54.797772] EXT3-fs: mounted filesystem with ordered data mode.