<5>[ 0.000000] Linux version 2.6.20-15-generic (root@huffy) (gcc version 4.1.2 20061212 (prerelease) (Ubuntu 4.1.1-21ubuntu2)) #1 SMP Sat Apr 14 14:27:47 EDT 2007 (Ubuntu 2.6.20-15.26-generic) <6>[ 0.000000] BIOS-provided physical RAM map: <4>[ 0.000000] sanitize start <4>[ 0.000000] sanitize end <4>[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f000 end: 000000000009f000 type: 1 <4>[ 0.000000] copy_e820_map() type is E820_RAM <4>[ 0.000000] copy_e820_map() start: 000000000009f000 size: 0000000000001000 end: 00000000000a0000 type: 2 <4>[ 0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2 <4>[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003fdf0000 end: 000000003fef0000 type: 1 <4>[ 0.000000] copy_e820_map() type is E820_RAM <4>[ 0.000000] copy_e820_map() start: 000000003fef0000 size: 0000000000003000 end: 000000003fef3000 type: 4 <4>[ 0.000000] copy_e820_map() start: 000000003fef3000 size: 000000000000d000 end: 000000003ff00000 type: 3 <4>[ 0.000000] copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2 <4>[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000001400000 end: 0000000100000000 type: 2 <4>[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) <4>[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) <4>[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) <4>[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fef0000 (usable) <4>[ 0.000000] BIOS-e820: 000000003fef0000 - 000000003fef3000 (ACPI NVS) <4>[ 0.000000] BIOS-e820: 000000003fef3000 - 000000003ff00000 (ACPI data) <4>[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) <4>[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) <5>[ 0.000000] 126MB HIGHMEM available. <5>[ 0.000000] 896MB LOWMEM available. <6>[ 0.000000] found SMP MP-table at 000f5cc0 <7>[ 0.000000] Entering add_active_range(0, 0, 261872) 0 entries of 256 used <4>[ 0.000000] Zone PFN ranges: <4>[ 0.000000] DMA 0 -> 4096 <4>[ 0.000000] Normal 4096 -> 229376 <4>[ 0.000000] HighMem 229376 -> 261872 <4>[ 0.000000] early_node_map[1] active PFN ranges <4>[ 0.000000] 0: 0 -> 261872 <7>[ 0.000000] On node 0 totalpages: 261872 <7>[ 0.000000] DMA zone: 32 pages used for memmap <7>[ 0.000000] DMA zone: 0 pages reserved <7>[ 0.000000] DMA zone: 4064 pages, LIFO batch:0 <7>[ 0.000000] Normal zone: 1760 pages used for memmap <7>[ 0.000000] Normal zone: 223520 pages, LIFO batch:31 <7>[ 0.000000] HighMem zone: 253 pages used for memmap <7>[ 0.000000] HighMem zone: 32243 pages, LIFO batch:7 <6>[ 0.000000] DMI 2.4 present. <7>[ 0.000000] ACPI: RSDP (v002 Nvidia ) @ 0x000f77b0 <7>[ 0.000000] ACPI: XSDT (v001 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x3fef30c0 <7>[ 0.000000] ACPI: FADT (v003 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x3fefa480 <7>[ 0.000000] ACPI: HPET (v001 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000098) @ 0x3fefa6c0 <7>[ 0.000000] ACPI: MCFG (v001 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x3fefa740 <7>[ 0.000000] ACPI: MADT (v001 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x3fefa5c0 <7>[ 0.000000] ACPI: SSDT (v001 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x3fefa7c0 <7>[ 0.000000] ACPI: SSDT (v001 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x3fefad20 <7>[ 0.000000] ACPI: DSDT (v001 NVIDIA ASUSACPI 0x00001000 MSFT 0x03000000) @ 0x00000000 <6>[ 0.000000] ACPI: PM-Timer IO Port: 0x4008 <7>[ 0.000000] ACPI: Local APIC address 0xfee00000 <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) <4>[ 0.000000] Processor #0 15:6 APIC version 20 <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) <4>[ 0.000000] Processor #1 15:6 APIC version 20 <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) <6>[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) <6>[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) <6>[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) <6>[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) <6>[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) <4>[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 <6>[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) <6>[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) <7>[ 0.000000] ACPI: IRQ9 used by override. <7>[ 0.000000] ACPI: IRQ14 used by override. <7>[ 0.000000] ACPI: IRQ15 used by override. <4>[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs <6>[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000 <6>[ 0.000000] Using ACPI (MADT) for SMP configuration information <4>[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3ff00000:a0100000) <4>[ 0.000000] Detected 3000.311 MHz processor. <4>[ 19.473705] Built 1 zonelists. Total pages: 259827 <5>[ 19.473709] Kernel command line: root=UUID=1d18a66c-ae41-4c7f-84a2-e3481708cffe ro quiet splash <7>[ 19.473861] mapped APIC to ffffd000 (fee00000) <7>[ 19.473863] mapped IOAPIC to ffffc000 (fec00000) <6>[ 19.473866] Enabling fast FPU save and restore... done. <6>[ 19.473869] Enabling unmasked SIMD FPU exception support... done. <6>[ 19.473878] Initializing CPU#0 <4>[ 19.474210] PID hash table entries: 4096 (order: 12, 16384 bytes) <7>[ 19.474242] spurious 8259A interrupt: IRQ7. <4>[ 19.475597] Console: colour VGA+ 80x25 <4>[ 19.475997] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) <4>[ 19.476389] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) <6>[ 19.496435] Memory: 1027692k/1047488k available (1992k kernel code, 19140k reserved, 893k data, 328k init, 129984k highmem) <4>[ 19.496445] virtual kernel memory layout: <4>[ 19.496446] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB) <4>[ 19.496447] pkmap : 0xff800000 - 0xffc00000 (4096 kB) <4>[ 19.496448] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) <4>[ 19.496450] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) <4>[ 19.496451] .init : 0xc03d7000 - 0xc0429000 ( 328 kB) <4>[ 19.496452] .data : 0xc02f2234 - 0xc03d16d4 ( 893 kB) <4>[ 19.496453] .text : 0xc0100000 - 0xc02f2234 (1992 kB) <4>[ 19.496456] Checking if this processor honours the WP bit even in supervisor mode... Ok. <6>[ 19.496609] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31 <6>[ 19.496615] hpet0: 3 32-bit timers, 25000000 Hz <4>[ 19.497622] Using HPET for base-timer <4>[ 19.576537] Calibrating delay using timer specific routine.. 6006.31 BogoMIPS (lpj=12012634) <6>[ 19.576577] Security Framework v1.0.0 initialized <6>[ 19.576582] SELinux: Disabled at boot. <4>[ 19.576597] Mount-cache hash table entries: 512 <7>[ 19.576724] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e49d 00000000 00000001 <4>[ 19.576733] monitor/mwait feature present. <4>[ 19.576735] using mwait in idle threads. <6>[ 19.576742] CPU: Trace cache: 12K uops, L1 D cache: 16K <6>[ 19.576744] CPU: L2 cache: 2048K <6>[ 19.576747] CPU: Physical Processor ID: 0 <6>[ 19.576748] CPU: Processor Core ID: 0 <7>[ 19.576750] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003180 0000e49d 00000000 00000001 <4>[ 19.576760] Compat vDSO mapped to ffffe000. <4>[ 19.576764] Remapping vsyscall page to ffffe000 <6>[ 19.576778] Checking 'hlt' instruction... OK. <6>[ 19.592627] SMP alternatives: switching to UP code <6>[ 19.592977] Early unpacking initramfs... done <6>[ 19.854208] ACPI: Core revision 20060707 <6>[ 19.857823] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT. <4>[ 19.863927] CPU0: Intel(R) Pentium(R) D CPU 3.00GHz stepping 05 <6>[ 19.863949] SMP alternatives: switching to SMP code <4>[ 19.864081] Booting processor 1/1 eip 3000 <6>[ 19.874653] Initializing CPU#1 <4>[ 19.952180] Calibrating delay using timer specific routine.. 6000.45 BogoMIPS (lpj=12000901) <7>[ 19.952189] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e49d 00000000 00000001 <4>[ 19.952195] monitor/mwait feature present. <6>[ 19.952201] CPU: Trace cache: 12K uops, L1 D cache: 16K <6>[ 19.952203] CPU: L2 cache: 2048K <6>[ 19.952205] CPU: Physical Processor ID: 0 <6>[ 19.952206] CPU: Processor Core ID: 1 <7>[ 19.952208] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003180 0000e49d 00000000 00000001 <4>[ 19.952653] CPU1: Intel(R) Pentium(R) D CPU 3.00GHz stepping 05 <6>[ 19.952688] Total of 2 processors activated (12006.76 BogoMIPS). <4>[ 19.952929] ENABLING IO-APIC IRQs <6>[ 19.953132] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 <3>[ 19.992827] ..MP-BIOS bug: 8254 timer not connected to IO-APIC <6>[ 19.992866] ...trying to set up timer (IRQ0) through the 8259A ... failed. <6>[ 19.992869] ...trying to set up timer as Virtual Wire IRQ... failed. <6>[ 20.032561] ...trying to set up timer as ExtINT IRQ... works. <6>[ 20.275876] checking TSC synchronization across 2 CPUs: passed. <6>[ 0.004006] Brought up 2 CPUs <4>[ 0.237487] migration_cost=3430 <6>[ 0.237788] Booting paravirtualized kernel on bare hardware <4>[ 0.237868] Time: 19:56:04 Date: 03/14/107 <6>[ 0.237902] NET: Registered protocol family 16 <6>[ 0.237992] EISA bus registered <6>[ 0.237998] ACPI: bus type pci registered <6>[ 0.245210] PCI: PCI BIOS revision 3.00 entry at 0xf2060, last bus=6 <6>[ 0.245213] PCI: Using configuration type 1 <4>[ 0.245215] Setting up standard PCI resources <6>[ 0.258456] ACPI: Interpreter enabled <6>[ 0.258459] ACPI: Using IOAPIC for interrupt routing <6>[ 0.259180] ACPI: PCI Root Bridge [PCI0] (0000:00) <7>[ 0.259187] PCI: Probing PCI hardware (bus 00) <7>[ 0.260674] Boot video device is 0000:01:00.0 <6>[ 0.261296] PCI: Transparent bridge - 0000:00:10.0 <7>[ 0.261377] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <7>[ 0.353509] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] <4>[ 0.360149] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. <4>[ 0.360560] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 *10 11 14 15) <4>[ 0.360969] ACPI: PCI Interrupt Link [LNK3] (IRQs *5 7 9 10 11 14 15) <4>[ 0.361371] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. <4>[ 0.361774] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 *11 14 15) <4>[ 0.362175] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. <4>[ 0.362582] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. <4>[ 0.362987] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. <4>[ 0.363391] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15) <4>[ 0.363799] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled. <4>[ 0.364220] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 15) *0, disabled. <4>[ 0.364624] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled. <4>[ 0.365029] ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15) <4>[ 0.365426] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. <4>[ 0.365829] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled. <4>[ 0.366229] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15) <4>[ 0.366629] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15) <4>[ 0.367031] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. <4>[ 0.367432] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15) <4>[ 0.367831] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15) <4>[ 0.368334] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. <4>[ 0.368822] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. <4>[ 0.369317] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. <4>[ 0.369808] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. <4>[ 0.370295] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. <4>[ 0.370784] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. <4>[ 0.371272] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. <4>[ 0.371770] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. <4>[ 0.372280] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. <4>[ 0.372770] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. <4>[ 0.373262] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. <4>[ 0.373751] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. <4>[ 0.374241] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. <4>[ 0.374731] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled. <4>[ 0.375221] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. <4>[ 0.375719] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. <4>[ 0.376208] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. <4>[ 0.376701] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. <4>[ 0.377195] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. <4>[ 0.377685] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. <4>[ 0.378175] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. <6>[ 0.378590] Linux Plug and Play Support v0.97 (c) Adam Belay <6>[ 0.378600] pnp: PnP ACPI init <6>[ 0.385947] pnp: PnP ACPI: found 15 devices <6>[ 0.385953] PnPBIOS: Disabled by ACPI PNP <6>[ 0.386003] PCI: Using ACPI for IRQ routing <6>[ 0.386008] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report <6>[ 0.588039] NET: Registered protocol family 8 <6>[ 0.588042] NET: Registered protocol family 20 <6>[ 0.588506] pnp: 00:01: ioport range 0x4000-0x407f could not be reserved <6>[ 0.588510] pnp: 00:01: ioport range 0x4080-0x40ff has been reserved <6>[ 0.588513] pnp: 00:01: ioport range 0x4400-0x447f has been reserved <6>[ 0.588515] pnp: 00:01: ioport range 0x4480-0x44ff could not be reserved <6>[ 0.588518] pnp: 00:01: ioport range 0x4800-0x487f has been reserved <6>[ 0.588521] pnp: 00:01: ioport range 0x4880-0x48ff has been reserved <6>[ 0.588997] PCI: Bridge: 0000:00:02.0 <6>[ 0.589001] IO window: a000-afff <6>[ 0.589006] MEM window: c6000000-c8ffffff <6>[ 0.589009] PREFETCH window: b0000000-bfffffff <6>[ 0.589014] PCI: Bridge: 0000:00:04.0 <6>[ 0.589015] IO window: disabled. <6>[ 0.589019] MEM window: disabled. <6>[ 0.589022] PREFETCH window: disabled. <6>[ 0.589026] PCI: Bridge: 0000:00:05.0 <6>[ 0.589027] IO window: disabled. <6>[ 0.589031] MEM window: disabled. <6>[ 0.589034] PREFETCH window: disabled. <6>[ 0.589037] PCI: Bridge: 0000:00:06.0 <6>[ 0.589039] IO window: disabled. <6>[ 0.589043] MEM window: disabled. <6>[ 0.589045] PREFETCH window: disabled. <6>[ 0.589049] PCI: Bridge: 0000:00:07.0 <6>[ 0.589051] IO window: disabled. <6>[ 0.589054] MEM window: disabled. <6>[ 0.589057] PREFETCH window: disabled. <6>[ 0.589063] PCI: Bridge: 0000:00:10.0 <6>[ 0.589066] IO window: b000-bfff <6>[ 0.589071] MEM window: c4000000-c5ffffff <6>[ 0.589075] PREFETCH window: c0000000-c3ffffff <7>[ 0.589091] PCI: Setting latency timer of device 0000:00:02.0 to 64 <7>[ 0.589101] PCI: Setting latency timer of device 0000:00:04.0 to 64 <7>[ 0.589111] PCI: Setting latency timer of device 0000:00:05.0 to 64 <7>[ 0.589121] PCI: Setting latency timer of device 0000:00:06.0 to 64 <7>[ 0.589135] PCI: Setting latency timer of device 0000:00:07.0 to 64 <7>[ 0.589147] PCI: Setting latency timer of device 0000:00:10.0 to 64 <6>[ 0.589181] NET: Registered protocol family 2 <4>[ 0.633170] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) <4>[ 0.633329] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) <4>[ 0.633902] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) <6>[ 0.634189] TCP: Hash tables configured (established 131072 bind 65536) <6>[ 0.634192] TCP reno registered <6>[ 0.645249] checking if image is initramfs... it is <6>[ 1.161960] Freeing initrd memory: 6426k freed <6>[ 1.162686] audit: initializing netlink socket (disabled) <5>[ 1.162700] audit(1176580564.864:1): initialized <4>[ 1.162871] highmem bounce pool size: 64 pages <5>[ 1.163049] VFS: Disk quotas dquot_6.5.1 <4>[ 1.163078] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>[ 1.163142] io scheduler noop registered <6>[ 1.163145] io scheduler anticipatory registered <6>[ 1.163147] io scheduler deadline registered <6>[ 1.163178] io scheduler cfq registered (default) <7>[ 1.187488] PCI: Setting latency timer of device 0000:00:02.0 to 64 <4>[ 1.187524] assign_interrupt_mode Found MSI capability <7>[ 1.187527] Allocate Port Service[0000:00:02.0:pcie00] <7>[ 1.187619] PCI: Setting latency timer of device 0000:00:04.0 to 64 <4>[ 1.187654] assign_interrupt_mode Found MSI capability <7>[ 1.187657] Allocate Port Service[0000:00:04.0:pcie00] <7>[ 1.187747] PCI: Setting latency timer of device 0000:00:05.0 to 64 <4>[ 1.187782] assign_interrupt_mode Found MSI capability <7>[ 1.187785] Allocate Port Service[0000:00:05.0:pcie00] <7>[ 1.187873] PCI: Setting latency timer of device 0000:00:06.0 to 64 <4>[ 1.187908] assign_interrupt_mode Found MSI capability <7>[ 1.187911] Allocate Port Service[0000:00:06.0:pcie00] <7>[ 1.188000] PCI: Setting latency timer of device 0000:00:07.0 to 64 <4>[ 1.188035] assign_interrupt_mode Found MSI capability <7>[ 1.188037] Allocate Port Service[0000:00:07.0:pcie00] <6>[ 1.188185] isapnp: Scanning for PnP cards... <6>[ 1.539526] isapnp: No Plug & Play device found <6>[ 1.566093] Real Time Clock Driver v1.12ac <7>[ 1.566292] hpet_resources: 0xfeff0000 is busy <6>[ 1.566327] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled <6>[ 1.566465] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <6>[ 1.567172] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <6>[ 1.567420] mice: PS/2 mouse device common for all mice <4>[ 1.568028] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize <6>[ 1.568262] input: Macintosh mouse button emulation as /class/input/input0 <6>[ 1.568301] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 <6>[ 1.568305] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <6>[ 1.568520] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 <6>[ 1.571976] serio: i8042 KBD port at 0x60,0x64 irq 1 <6>[ 1.571981] serio: i8042 AUX port at 0x60,0x64 irq 12 <6>[ 1.572156] EISA: Probing bus 0 at eisa.0 <4>[ 1.572174] Cannot allocate resource for EISA slot 4 <4>[ 1.572177] Cannot allocate resource for EISA slot 5 <6>[ 1.572189] EISA: Detected 0 cards. <6>[ 1.602257] TCP cubic registered <6>[ 1.602277] NET: Registered protocol family 1 <6>[ 1.602308] Starting balanced_irq <4>[ 1.602315] Using IPI No-Shortcut mode <6>[ 1.602388] input: AT Translated Set 2 keyboard as /class/input/input1 <6>[ 1.602438] ACPI: (supports S0 S1 S3 S4 S5) <6>[ 1.602483] Time: tsc clocksource has been installed. <4>[ 1.602511] Magic number: 3:944:950 <4>[ 1.602528] hash matches device ttya5 <4>[ 1.602627] hash matches device tty7 <6>[ 1.602828] Freeing unused kernel memory: 328k freed <6>[ 2.850886] ACPI: Fan [FAN] (on) <4>[ 2.854705] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [Nvidia] OemTableId [ASUSACPI] [20060707] <4>[ 2.855097] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [Nvidia] OemTableId [ASUSACPI] [20060707] <4>[ 2.855161] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707] <4>[ 2.855169] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707] <6>[ 2.856778] ACPI: Thermal Zone [THRM] (40 C) <6>[ 3.308498] usbcore: registered new interface driver usbfs <6>[ 3.308523] usbcore: registered new interface driver hub <6>[ 3.308549] usbcore: registered new device driver usb <4>[ 3.309985] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23 <6>[ 3.309994] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 23 (level, low) -> IRQ 16 <7>[ 3.310007] PCI: Setting latency timer of device 0000:00:0b.1 to 64 <6>[ 3.310010] ehci_hcd 0000:00:0b.1: EHCI Host Controller <6>[ 3.310150] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 <6>[ 3.310178] ehci_hcd 0000:00:0b.1: debug port 1 <7>[ 3.310184] PCI: cache line size of 128 is not supported by device 0000:00:0b.1 <6>[ 3.310193] ehci_hcd 0000:00:0b.1: irq 16, io mem 0xc9006000 <6>[ 3.310202] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 <6>[ 3.310280] usb usb1: configuration #1 chosen from 1 choice <6>[ 3.310307] hub 1-0:1.0: USB hub found <6>[ 3.310315] hub 1-0:1.0: 8 ports detected <7>[ 3.312709] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver <6>[ 3.388381] Floppy drive(s): fd0 is 1.44M <6>[ 3.416487] FDC 0 is a post-1991 82077 <4>[ 3.417722] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22 <6>[ 3.417732] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 22 (level, low) -> IRQ 17 <7>[ 3.417748] PCI: Setting latency timer of device 0000:00:0b.0 to 64 <6>[ 3.417752] ohci_hcd 0000:00:0b.0: OHCI Host Controller <6>[ 3.417800] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 <6>[ 3.417824] ohci_hcd 0000:00:0b.0: irq 17, io mem 0xc9005000 <6>[ 3.476646] usb usb2: configuration #1 chosen from 1 choice <6>[ 3.476681] hub 2-0:1.0: USB hub found <6>[ 3.476692] hub 2-0:1.0: 8 ports detected <4>[ 3.583245] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 <6>[ 3.583253] ACPI: PCI Interrupt 0000:06:0c.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18 <6>[ 3.583292] skge 1.9 addr 0xc5000000 irq 18 chip Yukon-Lite rev 9 <6>[ 3.583409] skge eth0: addr 00:18:f3:f0:a3:ba <5>[ 3.590181] SCSI subsystem initialized <7>[ 3.595527] libata version 2.20 loaded. <7>[ 3.597058] pata_amd 0000:00:0d.0: version 0.2.8 <7>[ 3.597098] PCI: Setting latency timer of device 0000:00:0d.0 to 64 <6>[ 3.600883] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14 <6>[ 3.600976] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15 <6>[ 3.600999] scsi0 : pata_amd <6>[ 3.775507] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360 <6>[ 3.775513] ata1.00: ATA-5: WDC WD400BB-00DGA0, 05.03E05, max UDMA/100 <6>[ 3.775517] ata1.00: 78165360 sectors, multi 1: LBA <6>[ 3.776383] ata1.01: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648 <6>[ 3.776387] ata1.01: ATA-5: WDC WD1200AB-00CBA1, 04.07B04, max UDMA/100 <6>[ 3.776391] ata1.01: 234441648 sectors, multi 1: LBA <6>[ 3.789362] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360 <6>[ 3.789366] ata1.00: configured for UDMA/100 <6>[ 3.801125] ata1.01: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648 <6>[ 3.801129] ata1.01: configured for UDMA/100 <6>[ 3.801139] scsi1 : pata_amd <6>[ 3.843988] usb 1-4: new high speed USB device using ehci_hcd and address 3 <6>[ 3.984294] usb 1-4: configuration #1 chosen from 1 choice <6>[ 4.286214] ata2.00: ATAPI, max UDMA/33 <6>[ 4.286218] ata2.01: ATAPI, max UDMA/33 <6>[ 4.291701] usb 2-3: new full speed USB device using ohci_hcd and address 2 <6>[ 4.696504] usb 2-3: configuration #1 chosen from 1 choice <6>[ 4.699614] usbcore: registered new interface driver libusual <6>[ 4.703265] Initializing USB Mass Storage driver... <6>[ 4.703333] scsi2 : SCSI emulation for USB Mass Storage devices <7>[ 4.703380] usb-storage: device found at 3 <7>[ 4.703382] usb-storage: waiting for device to settle before scanning <6>[ 4.703393] usbcore: registered new interface driver usb-storage <6>[ 4.703396] USB Mass Storage support registered. <7>[ 9.697593] usb-storage: device scan complete <5>[ 9.698722] scsi 2:0:0:0: Direct-Access Memorex TD Classic 003C 5.00 PQ: 0 ANSI: 0 CCS <5>[ 9.706428] SCSI device sda: 2015232 512-byte hdwr sectors (1032 MB) <5>[ 9.708300] sda: Write Protect is off <7>[ 9.708303] sda: Mode Sense: 23 00 00 00 <3>[ 9.708306] sda: assuming drive cache: write through <5>[ 9.713670] SCSI device sda: 2015232 512-byte hdwr sectors (1032 MB) <5>[ 9.715293] sda: Write Protect is off <7>[ 9.715296] sda: Mode Sense: 23 00 00 00 <3>[ 9.715299] sda: assuming drive cache: write through <6>[ 9.715337] sda: sda1 <5>[ 9.717495] sd 2:0:0:0: Attached scsi removable disk sda <5>[ 9.721283] sd 2:0:0:0: Attached scsi generic sg0 type 0 <4>[ 34.256755] ata2.00: qc timeout (cmd 0xef) <3>[ 34.256764] ata2.00: failed to set xfermode (err_mask=0x4) <4>[ 34.256807] ata2: failed to recover some devices, retrying in 5 secs <4>[ 69.711028] ata2.00: qc timeout (cmd 0xef) <3>[ 69.711035] ata2.00: failed to set xfermode (err_mask=0x4) <4>[ 69.711075] ata2.00: limiting speed to UDMA/33:PIO3 <4>[ 69.711078] ata2: failed to recover some devices, retrying in 5 secs <4>[ 105.165353] ata2.00: qc timeout (cmd 0xef) <3>[ 105.165359] ata2.00: failed to set xfermode (err_mask=0x4) <4>[ 105.165398] ata2.00: disabled <4>[ 105.165401] ata2: failed to recover some devices, retrying in 5 secs <3>[ 110.165128] ata2.01: failed to set xfermode (err_mask=0x40) <4>[ 110.165168] ata2: failed to recover some devices, retrying in 5 secs <6>[ 115.647970] ata2.01: configured for UDMA/33 <5>[ 115.648093] scsi 0:0:0:0: Direct-Access ATA WDC WD400BB-00DG 05.0 PQ: 0 ANSI: 5 <5>[ 115.648178] SCSI device sdb: 78165360 512-byte hdwr sectors (40021 MB) <5>[ 115.648193] sdb: Write Protect is off <7>[ 115.648196] sdb: Mode Sense: 00 3a 00 00 <5>[ 115.648216] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA <5>[ 115.648272] SCSI device sdb: 78165360 512-byte hdwr sectors (40021 MB) <5>[ 115.648284] sdb: Write Protect is off <7>[ 115.648287] sdb: Mode Sense: 00 3a 00 00 <5>[ 115.648311] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA <6>[ 115.648315] sdb:<3>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>[ 115.673452] ata1.00: (BMDMA stat 0x64) <3>[ 115.673497] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in <4>[ 115.673499] res 51/84:00:07:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) <6>[ 115.673563] ata1: soft resetting port <6>[ 115.836670] ata1.01: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648 <6>[ 115.844873] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360 <6>[ 115.852897] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360 <6>[ 115.852901] ata1.00: configured for UDMA/100 <6>[ 115.860688] ata1.01: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648 <6>[ 115.860691] ata1.01: configured for UDMA/100 <6>[ 115.860699] ata1: EH complete <3>[ 115.865144] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>[ 115.865184] ata1.00: (BMDMA stat 0x64) <3>[ 115.865227] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in <4>[ 115.865228] res 51/84:00:07:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) <6>[ 115.865285] ata1: soft resetting port <6>[ 116.028594] ata1.01: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648 <6>[ 116.036792] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360 <6>[ 116.044847] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360 <6>[ 116.044851] ata1.00: configured for UDMA/100 <6>[ 116.052616] ata1.01: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648 <6>[ 116.052620] ata1.01: configured for UDMA/100 <6>[ 116.052627] ata1: EH complete <3>[ 116.056820] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>[ 116.056860] ata1.00: (BMDMA stat 0x64) <3>[ 116.056902] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in <4>[ 116.056904] res 51/84:00:07:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) <6>[ 116.056960] ata1: soft resetting port <6>[ 116.220546] ata1.01: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648 <6>[ 116.228771] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360 <6>[ 116.236790] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360 <6>[ 116.236793] ata1.00: configured for UDMA/100 <6>[ 116.244575] ata1.01: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648 <6>[ 116.244578] ata1.01: configured for UDMA/100 <6>[ 116.244585] ata1: EH complete <4>[ 116.248500] ata1.00: limiting speed to UDMA/66:PIO4 <3>[ 116.248504] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>[ 116.248544] ata1.00: (BMDMA stat 0x64) <3>[ 116.248586] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in <4>[ 116.248587] res 51/84:00:07:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) <6>[ 116.248644] ata1: soft resetting port <6>[ 116.412470] ata1.01: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648 <6>[ 116.420731] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360 <6>[ 116.432717] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360 <6>[ 116.432721] ata1.00: configured for UDMA/66 <6>[ 116.440489] ata1.01: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648 <6>[ 116.440493] ata1.01: configured for UDMA/100 <6>[ 116.440500] ata1: EH complete <3>[ 116.448570] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>[ 116.448610] ata1.00: (BMDMA stat 0x64) <3>[ 116.448653] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in <4>[ 116.448654] res 51/84:00:07:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) <6>[ 116.448718] ata1: soft resetting port <6>[ 116.612424] ata1.01: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648 <6>[ 116.620577] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360 <6>[ 116.632636] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360 <6>[ 116.632640] ata1.00: configured for UDMA/66 <6>[ 116.640415] ata1.01: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648 <6>[ 116.640419] ata1.01: configured for UDMA/100 <6>[ 116.640426] ata1: EH complete <3>[ 116.648580] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>[ 116.648628] ata1.00: (BMDMA stat 0x64) <3>[ 116.648677] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in <4>[ 116.648678] res 51/84:00:07:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) <6>[ 116.648749] ata1: soft resetting port <6>[ 116.812345] ata1.01: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648 <6>[ 116.820563] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360 <6>[ 116.832551] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360 <6>[ 116.832555] ata1.00: configured for UDMA/66 <6>[ 116.840379] ata1.01: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648 <6>[ 116.840383] ata1.01: configured for UDMA/100 <6>[ 116.840390] sd 0:0:0:0: SCSI error: return code = 0x08000002 <6>[ 116.840393] sdb: Current [descriptor]: sense key: Aborted Command <6>[ 116.840398] Additional sense: Scsi parity error <6>[ 116.840404] Descriptor sense data with sense descriptors (in hex): <6>[ 116.840407] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00 <6>[ 116.840420] 00 00 00 07 <4>[ 116.840425] end_request: I/O error, dev sdb, sector 0 <3>[ 116.840430] Buffer I/O error on device sdb, logical block 0 <6>[ 116.840485] ata1: EH complete <3>[ 116.848596] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>[ 116.848643] ata1.00: (BMDMA stat 0x64) <3>[ 116.848692] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in <4>[ 116.848694] res 51/84:00:07:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) <6>[ 116.848764] ata1: soft resetting port <6>[ 117.012261] ata1.01: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648 <6>[ 117.020509] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360 <6>[ 117.032495] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360 <6>[ 117.032498] ata1.00: configured for UDMA/66 <6>[ 117.044306] ata1.01: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648 <6>[ 117.044310] ata1.01: configured for UDMA/100 <6>[ 117.044318] ata1: EH complete <4>[ 117.048603] ata1.00: limiting speed to UDMA/33:PIO4 <3>[ 117.048606] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>[ 117.048654] ata1.00: (BMDMA stat 0x64) <3>[ 117.048702] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in <4>[ 117.048704] res 51/84:00:07:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) <6>[ 117.048775] ata1: soft resetting port <6>[ 117.212210] ata1.01: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648 <6>[ 117.220444] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360 <6>[ 117.232428] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360 <6>[ 117.232432] ata1.00: configured for UDMA/33 <6>[ 117.244216] ata1.01: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648 <6>[ 117.244220] ata1.01: configured for UDMA/100 <6>[ 117.244225] ata1: EH complete <2>[ 117.248392] ldm_validate_partition_table(): Disk read failed. <4>[ 117.248445] Dev sdb: unable to read RDB block 0 <4>[ 117.248667] unknown partition table <5>[ 117.248718] sd 0:0:0:0: Attached scsi disk sdb <5>[ 117.248768] sd 0:0:0:0: Attached scsi generic sg1 type 0 <5>[ 117.248854] scsi 0:0:1:0: Direct-Access ATA WDC WD1200AB-00C 04.0 PQ: 0 ANSI: 5 <5>[ 117.248912] SCSI device sdc: 234441648 512-byte hdwr sectors (120034 MB) <5>[ 117.248925] sdc: Write Protect is off <7>[ 117.248928] sdc: Mode Sense: 00 3a 00 00 <5>[ 117.248947] SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA <5>[ 117.248987] SCSI device sdc: 234441648 512-byte hdwr sectors (120034 MB) <5>[ 117.248999] sdc: Write Protect is off <7>[ 117.249002] sdc: Mode Sense: 00 3a 00 00 <5>[ 117.249021] SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA <6>[ 117.249025] sdc:<3>ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>[ 117.263047] ata1.01: (BMDMA stat 0x64) <3>[ 117.263095] ata1.01: cmd c8/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in <4>[ 117.263098] res 51/84:00:07:00:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error) <6>[ 117.263180] ata1: soft resetting port <6>[ 117.428318] ata1.01: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648 <6>[ 117.436347] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360 <6>[ 117.448373] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360 <6>[ 117.448377] ata1.00: configured for UDMA/33 <6>[ 117.460381] ata1.01: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648 <6>[ 117.460385] ata1.01: configured for UDMA/100 <6>[ 117.460392] ata1: EH complete <3>[ 117.463401] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>[ 117.463449] ata1.01: (BMDMA stat 0x64) <3>[ 117.463498] ata1.01: cmd c8/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in <4>[ 117.463499] res 51/84:00:07:00:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error) <6>[ 117.463570] ata1: soft resetting port <6>[ 117.628280] ata1.01: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648 <6>[ 117.636288] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360 <6>[ 117.648360] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360 <6>[ 117.648363] ata1.00: configured for UDMA/33 <6>[ 117.660276] ata1.01: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648 <6>[ 117.660280] ata1.01: configured for UDMA/100 <6>[ 117.660288] ata1: EH complete <5>[ 117.660310] SCSI device sdb: 78165360 512-byte hdwr sectors (40021 MB) <3>[ 117.663740] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>[ 117.663788] ata1.01: (BMDMA stat 0x64) <3>[ 117.663837] ata1.01: cmd c8/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in <4>[ 117.663838] res 51/84:00:07:00:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error) <6>[ 117.663909] ata1: soft resetting port <6>[ 117.828223] ata1.01: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648 <6>[ 117.836283] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360 <6>[ 117.848262] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360 <6>[ 117.848265] ata1.00: configured for UDMA/33 <6>[ 117.860246] ata1.01: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648 <6>[ 117.860250] ata1.01: configured for UDMA/100 <6>[ 117.860258] ata1: EH complete <5>[ 117.860278] sdb: Write Protect is off <7>[ 117.860282] sdb: Mode Sense: 00 3a 00 00 <4>[ 117.864077] ata1.01: limiting speed to UDMA/66:PIO4 <3>[ 117.864081] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>[ 117.864128] ata1.01: (BMDMA stat 0x64) <3>[ 117.864177] ata1.01: cmd c8/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in <4>[ 117.864178] res 51/84:00:07:00:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error) <6>[ 117.864249] ata1: soft resetting port <6>[ 118.028115] ata1.01: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648 <6>[ 118.036182] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360 <6>[ 118.048199] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360 <6>[ 118.048203] ata1.00: configured for UDMA/33 <6>[ 118.060171] ata1.01: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648 <6>[ 118.060174] ata1.01: configured for UDMA/66 <6>[ 118.060182] ata1: EH complete <3>[ 118.064482] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>[ 118.064529] ata1.01: (BMDMA stat 0x64) <3>[ 118.064579] ata1.01: cmd c8/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in <4>[ 118.064581] res 51/84:00:07:00:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error) <6>[ 118.064651] ata1: soft resetting port <6>[ 118.232082] ata1.01: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648 <6>[ 118.240131] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360 <6>[ 118.252118] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360 <6>[ 118.252122] ata1.00: configured for UDMA/33 <6>[ 118.264132] ata1.01: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648 <6>[ 118.264135] ata1.01: configured for UDMA/66 <6>[ 118.264144] ata1: EH complete <5>[ 118.264163] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA <3>[ 118.274806] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>[ 118.274857] ata1.01: (BMDMA stat 0x64) <3>[ 118.274906] ata1.01: cmd c8/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in <4>[ 118.274907] res 51/84:00:07:00:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error) <6>[ 118.274978] ata1: soft resetting port <6>[ 118.440021] ata1.01: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648 <6>[ 118.452002] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360 <6>[ 118.464026] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360 <6>[ 118.464030] ata1.00: configured for UDMA/33 <6>[ 118.476013] ata1.01: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648 <6>[ 118.476017] ata1.01: configured for UDMA/66 <6>[ 118.476025] sd 0:0:1:0: SCSI error: return code = 0x08000002 <6>[ 118.476028] sdc: Current [descriptor]: sense key: Aborted Command <6>[ 118.476032] Additional sense: Scsi parity error <6>[ 118.476038] Descriptor sense data with sense descriptors (in hex): <6>[ 118.476041] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00 <6>[ 118.476061] 00 00 00 07 <4>[ 118.476067] end_request: I/O error, dev sdc, sector 0 <3>[ 118.476071] Buffer I/O error on device sdc, logical block 0 <6>[ 118.476127] ata1: EH complete <3>[ 118.485176] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>[ 118.485223] ata1.01: (BMDMA stat 0x64) <3>[ 118.485272] ata1.01: cmd c8/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in <4>[ 118.485273] res 51/84:00:07:00:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error) <6>[ 118.485344] ata1: soft resetting port <6>[ 118.651961] ata1.01: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648 <6>[ 118.664012] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360 <6>[ 118.675996] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360 <6>[ 118.676000] ata1.00: configured for UDMA/33 <6>[ 118.687939] ata1.01: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648 <6>[ 118.687943] ata1.01: configured for UDMA/66 <6>[ 118.687951] ata1: EH complete <5>[ 118.687972] SCSI device sdb: 78165360 512-byte hdwr sectors (40021 MB) <4>[ 118.695530] ata1.01: limiting speed to UDMA/33:PIO4 <3>[ 118.695534] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>[ 118.695581] ata1.01: (BMDMA stat 0x64) <3>[ 118.695630] ata1.01: cmd c8/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in <4>[ 118.695632] res 51/84:00:07:00:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error) <6>[ 118.695702] ata1: soft resetting port <6>[ 118.859894] ata1.01: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648 <6>[ 118.871968] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360 <6>[ 118.883935] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360 <6>[ 118.883939] ata1.00: configured for UDMA/33 <6>[ 118.895933] ata1.01: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648 <6>[ 118.895937] ata1.01: configured for UDMA/33 <6>[ 118.895945] ata1: EH complete <5>[ 118.895965] sdb: Write Protect is off <7>[ 118.895969] sdb: Mode Sense: 00 3a 00 00 <2>[ 118.905708] ldm_validate_partition_table(): Disk read failed. <5>[ 118.905725] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA <5>[ 118.905755] SCSI device sdb: 78165360 512-byte hdwr sectors (40021 MB) <4>[ 118.905770] Dev sdc: unable to read RDB block 0 <5>[ 118.905774] sdb: Write Protect is off <7>[ 118.905779] sdb: Mode Sense: 00 3a 00 00 <5>[ 118.905867] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA <4>[ 118.906021] unknown partition table <5>[ 118.906070] sd 0:0:1:0: Attached scsi disk sdc <5>[ 118.906119] sd 0:0:1:0: Attached scsi generic sg2 type 0 <5>[ 118.907636] scsi 1:0:1:0: CD-ROM HP DVD Writer 420n 1.33 PQ: 0 ANSI: 5 <5>[ 118.907712] scsi 1:0:1:0: Attached scsi generic sg3 type 5 <7>[ 118.911724] sata_nv 0000:00:0e.0: version 3.3 <4>[ 118.912242] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21 <6>[ 118.912250] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 19 <7>[ 118.912272] PCI: Setting latency timer of device 0000:00:0e.0 to 64 <6>[ 118.913294] ata3: SATA max UDMA/133 cmd 0x000109f0 ctl 0x00010bf2 bmdma 0x0001d400 irq 19 <6>[ 118.913341] ata4: SATA max UDMA/133 cmd 0x00010970 ctl 0x00010b72 bmdma 0x0001d408 irq 19 <6>[ 118.913355] scsi3 : sata_nv <6>[ 119.225499] ata3: SATA link down (SStatus 0 SControl 300) <4>[ 119.235626] ATA: abnormal status 0x7F on port 0x000109f7 <6>[ 119.235649] scsi4 : sata_nv <6>[ 119.549228] ata4: SATA link down (SStatus 0 SControl 300) <4>[ 119.559353] ATA: abnormal status 0x7F on port 0x00010977 <4>[ 119.560621] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20 <6>[ 119.560627] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 20 <7>[ 119.560644] PCI: Setting latency timer of device 0000:00:0f.0 to 64 <6>[ 119.560690] ata5: SATA max UDMA/133 cmd 0x000109e0 ctl 0x00010be2 bmdma 0x0001e800 irq 20 <6>[ 119.560732] ata6: SATA max UDMA/133 cmd 0x00010960 ctl 0x00010b62 bmdma 0x0001e808 irq 20 <6>[ 119.560744] scsi5 : sata_nv <6>[ 119.872973] ata5: SATA link down (SStatus 0 SControl 300) <4>[ 119.883100] ATA: abnormal status 0x7F on port 0x000109e7 <6>[ 119.883121] scsi6 : sata_nv <6>[ 120.196703] ata6: SATA link down (SStatus 0 SControl 300) <4>[ 120.206833] ATA: abnormal status 0x7F on port 0x00010967 <4>[ 120.226204] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray <6>[ 120.226209] Uniform CD-ROM driver Revision: 3.20 <7>[ 120.226257] sr 1:0:1:0: Attached scsi CD-ROM sr0 <6>[ 242.133114] kjournald starting. Commit interval 5 seconds <6>[ 242.135700] EXT3 FS on sda1, internal journal <6>[ 242.135707] EXT3-fs: mounted filesystem with ordered data mode.