diff -Nru /tmp/Xkd1Hqpyja/acpi-support-0.103/ac.d/90-hdparm.sh /tmp/bR5m3tQ13y/acpi-support-0.103/ac.d/90-hdparm.sh
--- /tmp/Xkd1Hqpyja/acpi-support-0.103/ac.d/90-hdparm.sh	1970-01-01 01:00:00.000000000 +0100
+++ /tmp/bR5m3tQ13y/acpi-support-0.103/ac.d/90-hdparm.sh	2007-12-01 22:17:46.000000000 +0100
@@ -0,0 +1,31 @@
+#! /bin/sh
+#
+# This script adjusts hard drive APM settings using hdparm. The hardware
+# defaults (usually hdparm -B 128) cause excessive head load/unload cycles
+# on many modern hard drives. We therefore set hdparm -B 254 while on AC
+# power. On battery we set hdparm -B 128, because the head parking is
+# very useful for shock protection.
+#
+
+DO_HDPARM=y
+if [ -e /usr/sbin/laptop_mode ] ; then 
+  LMT_CONTROL_HD_POWERMGMT=$(. /etc/laptop-mode/laptop-mode.conf && echo "$CONTROL_HD_POWERMGMT")
+  if [ "$LMT_CONTROL_HD_POWERMGMT" != 0 ] ; then
+    # Laptop mode controls hdparm -B settings, we don't.
+    DO_HDPARM=n
+  fi
+fi
+
+if [ $DO_HDPARM = y ] ; then
+  AC_POWER=$( /usr/bin/on_ac_power; echo $? )
+  for dev in /dev/sd? /dev/hd? ; do
+    if [ -b $dev ] ; then
+      if [ $AC_POWER -eq 1 ] ; then
+        hdparm -B 128 $dev
+      else
+        hdparm -B 254 $dev
+      fi
+    fi
+  done
+fi
+
diff -Nru /tmp/Xkd1Hqpyja/acpi-support-0.103/battery.d/90-hdparm.sh /tmp/bR5m3tQ13y/acpi-support-0.103/battery.d/90-hdparm.sh
--- /tmp/Xkd1Hqpyja/acpi-support-0.103/battery.d/90-hdparm.sh	1970-01-01 01:00:00.000000000 +0100
+++ /tmp/bR5m3tQ13y/acpi-support-0.103/battery.d/90-hdparm.sh	2007-12-01 22:17:46.000000000 +0100
@@ -0,0 +1,31 @@
+#! /bin/sh
+#
+# This script adjusts hard drive APM settings using hdparm. The hardware
+# defaults (usually hdparm -B 128) cause excessive head load/unload cycles
+# on many modern hard drives. We therefore set hdparm -B 254 while on AC
+# power. On battery we set hdparm -B 128, because the head parking is
+# very useful for shock protection.
+#
+
+DO_HDPARM=y
+if [ -e /usr/sbin/laptop_mode ] ; then 
+  LMT_CONTROL_HD_POWERMGMT=$(. /etc/laptop-mode/laptop-mode.conf && echo "$CONTROL_HD_POWERMGMT")
+  if [ "$LMT_CONTROL_HD_POWERMGMT" != 0 ] ; then
+    # Laptop mode controls hdparm -B settings, we don't.
+    DO_HDPARM=n
+  fi
+fi
+
+if [ $DO_HDPARM = y ] ; then
+  AC_POWER=$( /usr/bin/on_ac_power; echo $? )
+  for dev in /dev/sd? /dev/hd? ; do
+    if [ -b $dev ] ; then
+      if [ $AC_POWER -eq 1 ] ; then
+        hdparm -B 128 $dev
+      else
+        hdparm -B 254 $dev
+      fi
+    fi
+  done
+fi
+
diff -Nru /tmp/Xkd1Hqpyja/acpi-support-0.103/resume.d/90-hdparm.sh /tmp/bR5m3tQ13y/acpi-support-0.103/resume.d/90-hdparm.sh
--- /tmp/Xkd1Hqpyja/acpi-support-0.103/resume.d/90-hdparm.sh	1970-01-01 01:00:00.000000000 +0100
+++ /tmp/bR5m3tQ13y/acpi-support-0.103/resume.d/90-hdparm.sh	2007-12-01 22:17:46.000000000 +0100
@@ -0,0 +1,31 @@
+#! /bin/sh
+#
+# This script adjusts hard drive APM settings using hdparm. The hardware
+# defaults (usually hdparm -B 128) cause excessive head load/unload cycles
+# on many modern hard drives. We therefore set hdparm -B 254 while on AC
+# power. On battery we set hdparm -B 128, because the head parking is
+# very useful for shock protection.
+#
+
+DO_HDPARM=y
+if [ -e /usr/sbin/laptop_mode ] ; then 
+  LMT_CONTROL_HD_POWERMGMT=$(. /etc/laptop-mode/laptop-mode.conf && echo "$CONTROL_HD_POWERMGMT")
+  if [ "$LMT_CONTROL_HD_POWERMGMT" != 0 ] ; then
+    # Laptop mode controls hdparm -B settings, we don't.
+    DO_HDPARM=n
+  fi
+fi
+
+if [ $DO_HDPARM = y ] ; then
+  AC_POWER=$( /usr/bin/on_ac_power; echo $? )
+  for dev in /dev/sd? /dev/hd? ; do
+    if [ -b $dev ] ; then
+      if [ $AC_POWER -eq 1 ] ; then
+        hdparm -B 128 $dev
+      else
+        hdparm -B 254 $dev
+      fi
+    fi
+  done
+fi
+
diff -Nru /tmp/Xkd1Hqpyja/acpi-support-0.103/start.d/90-hdparm.sh /tmp/bR5m3tQ13y/acpi-support-0.103/start.d/90-hdparm.sh
--- /tmp/Xkd1Hqpyja/acpi-support-0.103/start.d/90-hdparm.sh	1970-01-01 01:00:00.000000000 +0100
+++ /tmp/bR5m3tQ13y/acpi-support-0.103/start.d/90-hdparm.sh	2007-12-01 22:17:46.000000000 +0100
@@ -0,0 +1,31 @@
+#! /bin/sh
+#
+# This script adjusts hard drive APM settings using hdparm. The hardware
+# defaults (usually hdparm -B 128) cause excessive head load/unload cycles
+# on many modern hard drives. We therefore set hdparm -B 254 while on AC
+# power. On battery we set hdparm -B 128, because the head parking is
+# very useful for shock protection.
+#
+
+DO_HDPARM=y
+if [ -e /usr/sbin/laptop_mode ] ; then 
+  LMT_CONTROL_HD_POWERMGMT=$(. /etc/laptop-mode/laptop-mode.conf && echo "$CONTROL_HD_POWERMGMT")
+  if [ "$LMT_CONTROL_HD_POWERMGMT" != 0 ] ; then
+    # Laptop mode controls hdparm -B settings, we don't.
+    DO_HDPARM=n
+  fi
+fi
+
+if [ $DO_HDPARM = y ] ; then
+  AC_POWER=$( /usr/bin/on_ac_power; echo $? )
+  for dev in /dev/sd? /dev/hd? ; do
+    if [ -b $dev ] ; then
+      if [ $AC_POWER -eq 1 ] ; then
+        hdparm -B 128 $dev
+      else
+        hdparm -B 254 $dev
+      fi
+    fi
+  done
+fi
+